Page 1
Installation and User guide EverydaySafe Drawer in Drawer and Single Drawer Fingerprint scanner Emergency Wi-Fi battery outlet Drawer in Drawer antenna Single Drawer SEE THE EVERYDAYSAFE INSTALLATION VIDEO Scan this QR code with your smartphone or visit www.everydaysafe.com V2.0...
Page 2
Installation ”Drawer in Drawer” and ”Single Drawer” 6 pcs torx 3,5x20mm 5 pcs cross 3x12mm M12x210mm 16mm 15mm 27KG <12 YEAR 19KG...
Page 3
Installation ”Drawer in Drawer” and ”Single Drawer” 27KG 12mm 12mm 19-22mm <=567mm 16mm 16mm 16-18mm <=567mm...
Page 4
Installation ”Drawer in Drawer” and ”Single Drawer” 12mm Left side Right side 12mm 12mm 80mm 12/16mm 12/16mm...
Page 5
Installation ”Drawer in Drawer” and ”Single Drawer” 12mm 16mm 2x3Pcs 2x3Pcs 4,0x20mm 4,5x25mm Blum Movento Runner System...
Page 6
Installation ”Drawer in Drawer” and ”Single Drawer” 19KG 19KG 43cm 12cm 19KG Drawer in Drawer 16-35mm Single Drawer...
Page 7
Installation ”Drawer in Drawer” and ”Single Drawer” 210mm Min 95mm 36mm Min 95mm 25Nm 15mm >2 Max19mm...
Page 8
Installation ”Drawer in Drawer” and ”Single Drawer” 20mm 19KG 20mm >= 30 KN resistance per anchor 26KG 4x20mm...
Page 9
Installation ”Drawer in Drawer” and ”Single Drawer” Click! 45° Click!
Page 10
Installation wooden front plate ”Single Drawer” 3x10mm 3x10mm 3x10mm Installation ”Drawer in Drawer” and ”Single Drawer”...
Page 11
Alignment of the safe drawer in the housing +/-1.5mm Drawer is preset in +3mm factory. Adjusting the slides can a ect the function of the safe!
Page 12
Emergency Power via Backup Battery For use in emergency situations only. During loss of electricity unclip the battery connector and attach the supplied 9V battery, keeping it outside of your EverydaySafe at all times until power is restored.
Page 13
Installing the App Chubbsafes Chubbsafes Download the app: Download the app: Chubbsafes Chubbsafes Start the app Fingerprint and create scanner account. 2,4 GHz Place your nger on the ngerprint scanner. Don't push, just place. 2,4 GHz Press, add a safe...
Page 14
Installing the App Place your ngertip on the nger- print sensor lightly. Go to scan your ngerprint and follow the instruction. Return to factory setting To reset all data, To perform a factory reset go to the “Settings” menu in the APP Open the drawer...
Need help?
Do you have a question about the EverydaySafe and is the answer not in the manual?
Questions and answers