ZyXEL Communications ZYWALL USG ZLD 2.21 Support Notes page 39

Step 4. Click CONFIGURATION > VPN > IPSec VPN > VPN Connection to open
the configuration screen to configure the phase-2 rule.
Step 5. Click Add button to add a rule.
Step 6. To configure the phase-2 rule, user needs to fill in:
- VPN connection name
- VPN gateway selection
- Policy for

Local network side

Remote network side
- Phase-2 setting

Active protocol

Encapsulation mode

Encryption algorithm

Authentication algorithm

Perfect Forward Secrecy
Step 4. Go back to the previous page, to see the newly created IKE rule with
the destination Dynamic. Click the Add button to add a Network policy.
Step 5. To configure the network policy, user needs to fill in:
- Policy name
- The gateway rule it is applied to
- Tunnel policy for
- Configure the IPSec proposal
All contents copyright (c) 2010 ZyXEL Communications Corporation.
ZyXEL

Local network side

Remote network side; "0.0.0.0" means for dynamic access

Encapsulation mode

Active protocol

Encryption algorithm

Authentication algorithm

Perfect Forward Secrecy
– ZyWALL USG Support Notes
39