Advertisement
Quick Links
PSRTBB8 suits PSCERT2000SB, PSCRT2000
PSRTBB12 suits PSCERT2000(L), PSCERT3000(L), PSCRT3000
1 INTRODUCTION
Thank you for purchasing the PowerShield Battery Bank. Before you start using the
product, please read this user manual. It contains instructions relating to safety,
installation, operation maintenance and warranty. Please keep this manual in a safe
place for future use.
2 PACKAGE CONTENTS
Included in the box:
•
PowerShield Battery Bank
•
DC battery cable
•
Ears x 2 & screw x 8
•
Extended stand
PSRTBB
PSRTBB6 suits PSCERT1000(L)
QUICK GUIDE
•
•
Quick Guide
Battery Anderson plug colour code:
– Red for PSRTBB6
– Grey for PSRTBB8
– Blue for PSRTBB12
Advertisement
Related Manuals for PowerShield PSRTBB
Summary of Contents for PowerShield PSRTBB
- Page 1 QUICK GUIDE 1 INTRODUCTION Thank you for purchasing the PowerShield Battery Bank. Before you start using the product, please read this user manual. It contains instructions relating to safety, installation, operation maintenance and warranty. Please keep this manual in a safe place for future use.
- Page 2 3 PRODUCT OVERVIEW These units are suitable with the following models Battery Bank Suitable for UPS model PSRTBB6 PSCERT1000(L) PSRTBB8 PSCRT2000 PSCERT2000SB PSRTBB12 PSCRT3000 PSCERT2000(L) PSCERT3000(L) 4 INSTALLATION AND SETUP WITH UPS Unpacking and Inspection Remove the battery bank from the packing. Note: The battery bank is heavy, please follow appropriate manual handling process Selecting Installation Location This unit can either be rack mounted or placed vertically with the feet provided with...
- Page 3 Tower Installation Connecting with UPS and Other Battery Box Use Battery connection cables to connect UPS to 1st battery bank and daisy chain subsequent battery banks with additional cables. Please DO NOT connect RJ11 detection cable to SNMP card as this will cause damage to the UPS and network card.
- Page 4 5 BATTERY REPLACEMENT Battery Bank Suitable Battery Cartridge PSRTBB6 PSBC3 x 2 PSRTBB8 PSBC4 x 2 PSRTBB12 PSBC6 x 2...
- Page 5 3-Battery Kit 6-Battery Kit...
- Page 6 Battery Bank. Only factory trained service personnel may perform repairs. If the unit is opened by a non factory trained person, or not under the instruction of PowerShield, the warranty may be voided. The Battery Bank is designed to be installed and operated without the need for specialised training.
- Page 7 6. Confirm UPS is not operating on batteries, then disconnect Battery Bank from UPS before any work is undertaken on the Battery Bank. 7. When changing batteries, install the same PowerShield approved battery pack. 8. Do not open or mutilate the battery or batteries.
Need help?
Do you have a question about the PSRTBB and is the answer not in the manual?
Questions and answers