Wan Backup (Prestige) - ZyXEL Communications VANTAGE CNM - V3.1 User Manual

Table 29 Device Operation > Device Configuration > Network > WAN > Setup (Prestige)
LABEL
Max Idle Timeout
(Appears when you use
PPPoA and PPPoE
encapsulation)
Zero Configuration
Subnet Mask (Appears
when you use ENET
ENCAP encapsulation)
ENET ENCAP Gateway
(Appears when you use
ENET ENCAP
encapsulation)
Apply
Reset

5.3.8 WAN Backup (Prestige)

Use this screen to change your device's WAN backup settings. To open this screen, select a
device, click Device Operation in the menu bar and then click Device Configuration >
Network > WAN > Backup in the navigation panel.
Vantage CNM User's Guide
DESCRIPTION
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
Select this if you want the device to automatically try to configure the
Internet connection. See the device's User's Guide for more information.
Enter the subnet mask provided by your ISP.
Enter the IP address of the gateway provided by your ISP.
Click this to save the changes.
Click this to begin configuring this screen afresh.
Chapter 5 Device Network Settings
103