Internet Access - Finish; Device Registration - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

Chapter 4 Installation Setup Wizard

4.1.7 Internet Access - Finish

You have set up your ZyWALL to access the Internet. After configuring the WAN
interface(s), a screen displays with your settings. If they are not correct, click
Back.
Figure 34 Internet Access: Ethernet Encapsulation
Note: If you have not already done so, you can register your ZyWALL with
myZyXEL.com and activate trials of services like IDP.
Click Next and use the following screen to perform a basic registration (see
Section 4.2 on page
your account details, click myZyXEL.com.
Alternatively, close the window to exit the wizard.

4.2 Device Registration

Use this screen to register your ZyWALL with myZXEL.com and activate trial
periods of subscription security features if you have not already done so. If the
ZyWALL is already registered this screen displays your user name and which trial
services are activated (if any). You can still activate any un-activated trial
services.
Note: You must be connected to the Internet to register.
72
72). If you want to do a more detailed registration or manage
ZyWALL USG 100/200 Series User's Guide