Device Panel LEDs FAN VENTS FAN VENT RPS CONNECTOR POWER...
Page 3
Overview The PPS250 is a power module for ZyXEL Ethernet Power-over- Ethernet (PoE) switches, such as the GS2200-24P. It provides additional external PoE power budget on top of the internal power budget of the switch.The switch supplies power to powered devices (PD) connected to...
The PPS250 is hot-swappable. 1. RPS CONNECTOR: Use the RPS cable provided to connect the PPS250 to your ZyXEL switch as shown below. The RPS connector should only be used with the PPS250. Do not insert other connector cables to the PPS250.
Page 5
LEDs After you connect the power to the PPS250, view the LEDs to ensure proper functioning of the PPS250 and as an aid in troubleshooting. Table 1: LED Descriptions Color Status Description Green The system is turned on. The system is off or has failed. Green There is a device connected.
Product Specifications The following tables summarize the PPS250’s hardware and firmware features. Hardware Specifications Dimensions 280 mm (L) x 206 mm (W) x 44 mm (H) Weight 2 kg Input Power 100 - 240V ~ 50/60Hz 2.5A MAX, 225W Output Power , 4.6 A MAX.
Safety Warnings • Do NOT use this product near water, for example, in a wet basement or near a swimming pool. • Do NOT expose your device to dampness, dust or corrosive liquids. • Do NOT store things on the device. •...
Published by ZyXEL Communications Corporation. All rights reserved. Disclaimer ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice.
Page 9
ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.