ZyXEL Communications PLA-401 V3 Quick Start Manual page 4

Connect the PLA-401 v3 to a
Cable/DSL Modem or Router
1. Use an Ethernet cable to connect the ETHERNET port on the PLA-
401 v3 to an available Ethernet port of your modem, router or switch.
2. Plug the PLA-401 v3 into a power outlet.
3. The power (
Ethernet (
blinking.
If none of the LEDs are on, unplug
your device and recheck your
hardware connections.
4
) LED should be on and the
) LED should be on or