Table of Contents
Advertisement
3.3 Testing the Connection to the Prestige
1.
Click Start, (All) Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ping" followed by a space and the management IP address of the
Prestige (192.168.5.1 is the default).
3.
Press ENTER and the following screen displays.
C:\>ping 192.168.5.1
Pinging 192.168.5.1 with 32 bytes of data:
Reply from 192.168.5.1: bytes=32 time=10ms TTL=254
Reply from 192.168.5.1: bytes=32 time<10ms TTL=254
Reply from 192.168.5.1: bytes=32 time<10ms TTL=254
Reply from 192.168.5.1: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.5.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum =
Your computer can now communicate with the Prestige.
4 Configuring Your Prestige
The web configurator is an HTML-based management interface that allows easy Prestige setup and
management via Internet browser. Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and
later versions with JavaScript enabled. Recommended screen resolution is 1024 by 768 pixels.
This Guide shows you how to perform initial configuration only. See your
User's Guide for background information on all Prestige features.
4.1 Accessing Your Prestige Via Web Configurator
1. Launch your web browser. The Prestige 2002 has a management IP address (default
192.168.5.1). This is because by default, the Prestige is set to receive a dynamically assigned IP
address and thus has no IP address. For initial configuration, use the Prestige's management IP
address. Whether you use the Prestige's management IP address or its actual IP address (after it
receives one), make sure that your computer's IP address is in the same subnet.
Prestige 2002 Series
10ms, Average =
10
2ms
Advertisement
Table of Contents
