ZyXEL Communications NWD-210N - FOR MAC V1.00 Manual page 16

Table 4 The Add Profile: System Configuration Screen
LABEL
CAM
(Constantly
Awake
Mode)
Power
Saving Mode
Network
Type
Tx Power
Channel
RTS
Threshold
ENGLISH
DESCRIPTION
Select this to have the NWD210N never go into
sleep mode.
Select this to have the NWD210N go into sleep
mode when it is not transmitting data.
Select Infrastructure to connect to a wireless
access point, or select 802.11 Ad Hoc to
connect to another wireless-enabled computer.
This field controls the transmission power of
the NWD210N. When using the NWD210N with
a notebook computer, select a lower
transmission power level when you are close to
the AP in order to conserve battery power.
In ad-hoc mode, choose the radio channel to
use for the wireless network. If there are other
networks in the area, choose a channel as far
away as possible, in order to minimize the risk
of interference.
In Infrastructure mode, this field is not
configurable; the NWD210N uses whichever
channel the access point uses.
Select the packet size above which the
NWD210N transmits an RTS (Request To
Send) message.
15