Advertisement
Quick Links
ITEM # LIDIKIT20
20V Lithium Ion Digital Inflator
Instructions
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
QUESTIONS? CONTACT CUSTOMER SERVICE.
Call Customer Service at 1-636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the
sales receipt is required.
KEEP MANUAL, SALES RECEIPT & WARRANTY FOR FUTURE REFERENCE
To register your product warranty, please visit buffalotools.com or scan the QR code.
Advertisement
Related Manuals for Buffalo Tools LIDIKIT20
Summary of Contents for Buffalo Tools LIDIKIT20
- Page 1 ITEM # LIDIKIT20 20V Lithium Ion Digital Inflator Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
- Page 2 PRODUCT SPECIFICATIONS • Features High Pressure Inflation for auto, bike and more • Features High Volume Inflate/Deflate for camping and household inflatable products • Features LED Light and 12V Car Adapter • Max Pressure: 160 PSI/11/Bar/1100kpa • Flow Rate: 0.424 CFM •...
- Page 3 NOTE: When power is supplied to the inflator by 12V AC adapter (#13) or by 18V battery pack, the digital readout display will remain on for approximately 10 minutes before the display shuts off/goes into sleep mode. This occurs when the unit is not operating. ITEM # LIDIKIT20 Instructions...
- Page 4 Fitting the Accessories for High Pressure Hose The High Pressure Hose uses the Universal Valve Adapter (#9) which attaches to either the Inflator Needle Valve (#14), a Presta Valve Adapter (#15), or a standard Tapered Nozzle (#16). They are stored on the backside of the unit. 1.
- Page 5 The blinking numbers will display the target PSI. Press the Start button (A) to begin inflating the item. The inflator will automatically stop when the item reaches the preset PSI/ BAR/ KPA level. Then press the power button to the OFF position. ITEM # LIDIKIT20 Instructions...
- Page 6 NOTE: You may notice the actual pressure reading may drop after a couple of seconds. This is normal. To stop the inflator at any time, press the main power button back to the OFF position. NOTE: If the power switch is turned off, all settings will be lost and will need to be reentered. This is a safety feature to prevent the risk of items over inflating.
Need help?
Do you have a question about the LIDIKIT20 and is the answer not in the manual?
Questions and answers