Related Manuals for Siemens WN34A1U8GB
Summary of Contents for Siemens WN34A1U8GB
- Page 1 WN34A1U8GB Washer dryer EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 22 1.1 General information.... 4 9 Programmes ...... 24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 28 1.4 Safe installation ...... 5 11 Laundry........ 28 1.5 Safe use ........ - Page 3 16 Basic settings...... 32 16.1 Overview of the basic set- tings........ 32 16.2 Changing the basic set- tings........ 32 17 Cleaning and servicing ... 32 17.1 Cleaning the drum.... 32 17.2 Cleaning the detergent drawer........ 33 17.3 Cleaning the drain pump.. 33 18 Troubleshooting...... 37 18.1 Emergency release ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶... -
Page 6: Safe Use
en Safety If the power cord is too short and a longer one is not available, ▶ please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. - Page 7 Safety en If the appliance or the power cord is damaged, immediately un- ▶ plug the power cord or switch off the fuse in the fuse box and turn off the water tap. Call customer services. → Page 44 ▶ An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces.
- Page 8 en Safety Keep detergents and care products out of the reach of children. ▶ WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. Remove all highly flammable objects from any pockets in your ▶...
-
Page 9: Safe Cleaning And Maintenance
Safety en Reaching into the drum while it is still turning may cause hand in- juries. Wait for the drum to come to a complete stop before reaching ▶ inside. CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer's original spare parts and original ac- ▶ cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Make sure that the valve housing ▶ Preventing material damage 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Preventing material damage ATTENTION! Ensure that the inner diameter of ▶... -
Page 12: Environmental Protection And Saving Energy
en Environmental protection and saving energy Do not use cleaning products with Reduce the washing temperature for ▶ a high alcohol content. lightly and normally soiled laundry. Do not use hard scouring pads or ▶ a At lower temperatures, the appli- cleaning sponges. -
Page 13: Installation And Connection
Installation and connection en Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-... -
Page 14: Removing The Transit Bolts
en Installation and connection Pull the hoses out of the holders. Installation loca- Requirements tion Base Secure the appli- ance with fixing brackets. Wooden joist Place the appli- floor ance on a water- resistant wooden board (minimum Unscrew and remove all of thickness of the screws for the 4 transit bolts 30 mm) which is... -
Page 15: Connecting The Appliance
Installation and connection en Remove the 4 sleeves. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight. -
Page 16: Aligning The Appliance
en Installation and connection Note: Observe the draining heights. 4.6 Aligning the appliance The draining heights are: minimum: In order to reduce noise and vibra- 60 cm, maximum: 100 cm tion and to prevent the appliance Siphon Secure the con- from moving, align the appliance cor- nection point with rectly. -
Page 17: Before Using For The First Time
Before using for the first time en Use a WAF 17 wrench to tighten Pour approx. 1 litre of tap water the lock nuts against the housing into compartment II. until they are hand-tight. Add washing powder containing In doing so, hold the foot tight and oxygen bleach to compartment II. -
Page 18: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 19: Control Panel
Familiarising yourself with your appliance en Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 29... -
Page 20: Display
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg. - Page 21 Display en Display Description Programme status: Drying Programme status: Crease-reduction function Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 31 The crease-reduction function is activated. → "Buttons", Page 22 Prewash is activated.
-
Page 22: Buttons
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection Description Temp. ℃ - 90 Adjust the temperature. Set temperature in °C. Spin Speed - 1400 Adjust the spin speed or deactivate the spin cycle. - Page 23 Buttons en Button Selection Description vario Speed Activate → "Childproof lock", Page 31 ¡ and Ready in/ Deactivate ¡ Time Dry Drying Aim Drying Aim When Drying Aim is selected, ¡ ¡ drying is activated after washing. ¡ When is selected, the ¡ ¡...
-
Page 24: Programmes
en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Dry- Wash Cottons Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for nor- mally soiled laundry when you activate vario Speed. - Page 25 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash Max. 1400 rpm ¡ Mixed Fabrics Wash items made from cotton, linen, or syn- thetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: Max. 60 °C ¡ Max.
- Page 26 en Programmes Programme Description Max. Max. load load (kg) (kg) Dry- Wash Hygiene Wash hard-wearing items made of cotton, linen or blended fabrics. Suitable for allergy sufferers and for strict hy- giene requirements. Note: Once the set temperature has been reached, it remains constant throughout the entire washing process.
- Page 27 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash Rapid 15'/ Wash items made from cotton, linen, or syn- Wash & Dry thetic or blended fabrics. Short programme for small items of lightly soiled laundry. Programme setting: Max. 40 °C ¡...
-
Page 28: Accessories
en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 44. Order num- Elbow Secure the water outlet hose in place. 00655300 Platform Install the appliance at a raised height so WZWP20W that it can be easily loaded and unloaded. -
Page 29: Basic Operation
Basic operation en Adjust the programme settings. Notes ▶ When using liquid detergents, only → "Buttons", Page 22 ¡ use liquid detergents that are self- Note: The programme settings are flowing not saved permanently for the pro- Do not mix different liquid deter- ¡ gramme. -
Page 30: Soaking Laundry
en Basic operation The display shows the programme During the drying cycle, the appli- duration or the programme end ance checks whether it is possible time. to add laundry. After the programme has ended, Note: If you want to add laundry, the display shows: End. follow the instructions on the dis- If the display shows , the laundry... -
Page 31: Switching Off The Appli- Ance
Dryness level en 13.12 Switching off the appli- 14.1 Changing the dryness ance level Turn the programme selector to For some programmes, you can change the dryness level so that your Turn off the tap. laundry will be drier or more damp. Wipe the rubber gasket dry and re- Set a washing and drying pro- move any foreign objects. -
Page 32: Basic Settings
en Basic settings So that the programme currently Press Spin Speed and, at the running is not cancelled, the pro- same time, turn the programme gramme selector must be set to selector to position 2. the initial programme. The display shows the current goes out on the display. -
Page 33: Cleaning The Detergent Drawer
Cleaning and servicing en Fit the insert and click it into place. 17.2 Cleaning the detergent drawer Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the opening for the deter- gent drawer. Pull out the insert upwards. Push in the detergent drawer. - Page 34 en Cleaning and servicing Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 35 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 33 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
- Page 36 en Cleaning and servicing Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump. Open the water tap. Insert the mains plug. Switch on the appliance.
-
Page 37: Troubleshooting
Troubleshooting en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶... - Page 38 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10", The filters in the water inflow are blocked. "H:95" and End. Clean the filters in the water inflow. ▶ The water pressure is low. Check whether the tap has sufficient water pres- ▶...
- Page 39 Troubleshooting en Fault Cause and troubleshooting Drum cleaning is required. Clean the drum. → Page 32 ▶ All other error codes. Malfunction Restart the appliance. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
- Page 40 en Troubleshooting Fault Cause and troubleshooting The appliance is vi- Appliance is not correctly aligned. brating, 'wandering' Align the appliance. → Page 16 ▶ and making loud The appliance feet are not fixed. noises during the spin Secure the appliance's feet. → Page 16 ▶ cycle.
- Page 41 Troubleshooting en Fault Cause and troubleshooting Fluff on the laundry. Fluff has accumulated in the drum. Start the Cottons 90℃ programme without any ▶ laundry or detergent. The laundry is too wet A low spin speed is selected. after the spinning Start the Spin programme.
- Page 42 en Troubleshooting Fault Cause and troubleshooting Creasing. Observe the programme's maximum load capacity. ▶ → Page 24 Prepare the laundry. → Page 28 ▶ The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
-
Page 43: Emergency Release
Transportation, storage and disposal en 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 33 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 44: Disposing Of Old Appliance
en Customer Service 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 45: Consumption Values
Consumption values en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values specified for programmes other than Eco 40-60 are only given as a guide and were determined in accordance with the applicable stand- ards EN60456 and EN62512. -
Page 46: Technical Data
en Technical data Technical data 22 Technical data Technical data Appliance height 84.8 cm Appliance width 59.8 cm Appliance depth 59.0 cm Appliance depth 63.0 cm with door closed Appliance depth 106.3 cm with door open Weight 71.2 kg Maximum load 8.0 kg Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion... - Page 48 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the WN34A1U8GB and is the answer not in the manual?
Questions and answers