Kurzanleitung AAN FK2/FK6 Familie /
1.
Auspacken /
unpacking
Bitte überprüfen Sie, dass der Packungsinhalt unbeschädigt ist. Im Fall einer Beschädigung die Komponenten keinesfalls in
Betrieb nehmen.
Please check product for shipping damage. If damaged, do not use under any circumstances.
2.
Bestimmungsgemäße Verwendung /
Das Lesesystem AAN FK2/FK6 Familie ist zur drahtlosen Identifizierung mittels zugehöriger Transponder bestimmt. Bitte
verwenden Sie das Gerät nicht in explosionsgefährdeten Räumen und auch sonst für keine Anwendung, welche nicht der
eigentlichen Anwendung entspricht.
The reading system AAN FK2/FK6 family is intended to be used with appropriate transponders to identify objects via
contactless interface. Please do not use in potentially explosive areas or use it for any other application but its intended use.
3.
Sicherheitshinweise /
Für eine zuverlässige Inbetriebnahme des Lesegerätes ist das in der Bedienungsanleitung beschriebene Vorgehen unbedingt
einzuhalten.
To securely setup the reading system, please study the complete manual.
4.
Komponenten /
components
Der Betrieb des Lesegerätes ist nur mit Originalkomponenten der AEG Identifikationssysteme GmbH zulässig (Antenne,
Spannungsversorgungsstecker, etc.)
The use of the reading system is only allowed using original components of AEG Identifikationssysteme GmbH (e.g. external
antenna, power supply plug, etc.)
5.
Inbetriebnahme /
setup
Bitte beachten Sie unbedingt die vollständige Bedienungsanleitung auf CD. Ohne Beachtung der Bedienungsanleitung auf CD
ist ein Betrieb des Gerätes weder sinnvoll noch zulässig.
Please make sure to read the entire manual on CD. Without using the manual on CD, the use of the product is neither
reasonable nor allowed.
6.
Schnittstellen /
user interfaces
Spannungsversorgung /
power
Schnittstelle / interface: Datenübertragung über ARE K1 /
Pinbelegung sowie Befehlssatz siehe Bedienungsanleitung auf CD /
Short instruction AAN FK2/FK6 series
intended use
security hints
supply: nur mit ARE K1 /
only with ARE K1
data transmission via ARE K1
pin assignment and instruction set see manual on CD
Need help?
Do you have a question about the ID AAN FK2 Series and is the answer not in the manual?
Questions and answers