Wireless Lan Advanced Screen; Figure 44 Network > Wireless Lan > Advanced; Table 30 Network > Wireless Lan > Advanced - ZyXEL Communications NBG-318S User Manual

Table 29 Network > Wireless LAN > MAC Filter
LABEL
Set
MAC
Address
Apply
Reset

5.7 Wireless LAN Advanced Screen

Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 44 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > Advanced
LABEL
Roaming Configuration
Enable
Roaming
Wireless Advanced Setup
RTS/CTS
Threshold
Fragmentation
Threshold
NBG-318S User's Guide
DESCRIPTION
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG-318S in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the NBG-318S.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Select this option if your network environment has multiple APs and you want your
wireless device to be able to access the network as you move between wireless
networks.
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
If the RTS/CTS value is greater than the Fragmentation Threshold value, then the
RTS/CTS handshake will never occur as data frames will be fragmented before they
reach RTS/CTS size.
Enter a value between 0 and 2432.
It is the maximum data fragment size that can be sent. Enter a value between 256
and 2432.
Chapter 5 Wireless LAN
83