Figure 148 Red Hat 9.0: Kde: Network Configuration: Devices - ZyXEL Communications NBG-318S User Manual

Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.

Figure 148 Red Hat 9.0: KDE: Network Configuration: Devices

2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
NBG-318S User's Guide
Appendix D Setting up Your Computer's IP Address
251