U-Line H-11526 Installation Manual

H-11526
SMOKE DETECTOR,
9V BATTERY, UL8
TOOLS NEEDED
Pencil Hammer
This unit is designed to be mounted on the ceiling or on
the wall if necessary.
WARNING! Do not install this alarm over an
existing electrical box. Only AC powered units
are intended for installation over electrical
boxes.
1. Hold bracket against the ceiling or wall and with a
pencil, mark inside mounting holes. (See Figure 1)
NOTE: To install on the wall, ensure round
portions of the mounting holes are vertical.
Figure 1
Mounting Holes
2. Drill into ceiling or wall at marked locations using
drill with 3/16" drill bit.
PAGE 1 OF 6
1-800-295-5510
uline.com
Drill 3/16" Drill Bit
INSTALLATION
3. Insert screw anchors (in plastic bag with screws)
4. Align mounting holes over previously installed screw
Pour le français, consulter les pages 5-6.
into previously drilled holes. If necessary, tap the
anchors gently with a hammer until flush with
the ceiling or wall. (See Figure 2)
Figure 2
Anchors
anchors. Secure to ceiling or wall through mounting
holes with provided screws. (See Figure 3)
NOTE: Ensure screws are snug with bracket.
Figure 3
Screws
Para Español, vea páginas 3-4.
0924 IH-11526