Page 1
Fireplace Stand with Electric Fireplace FP10865GB THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Page 26
The default setting temperature is 72°F(22°C). Press the HEATER button to activate the heater, re-press it to turn off the heater. ●When the heater is activated, press the heater button and hold it for 5 seconds, the display will flash then enter the temperature setting mode and change the temperature by repeatedly pressing the heater button.
Page 32
Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.
Page 34
USA office: Fontana AUS office: Truganina GBR office: FDS Corporation Limited,Unit 4, Blackacre Road, Great Blakenham,Ipswich, Ip6 0FL,United Kingdom...
Need help?
Do you have a question about the FP10865GB and is the answer not in the manual?
Questions and answers