Value 17.99.1214 User Manual

VALUE LCD/Plasma TV Wall Holder, Low Profile
Unpacking Instruc(ons
Carefully open the carton, remove contents and lay out on cardboard or other protec ve surface to
avoid damage. Check package contents against the Supplied Parts List in the next page to assure that
all components were received undamaged, Do not use damaged or defec ve parts.
Carefully read all instruc ons before a#emp ng installa on.
Important Safety Informa(on
Install and operate this device with care. Please read this instruc on before beginning the installa on,
and carefully follow all instruc ons contained herein. Use proper safety equipment during
installa on.
Please call a qualified installa on contractor for help if...
...you don't understand these instruc ons or have any doubts about the safety of the installa on.
...you are uncertain about the nature of your wall. Then please consult a qualified installa on
contractor.
Do not use this product for any purpose or in any configura on not explicitly specified in this
instruc on. We hereby disclaim any and all liablity for iniury or damage arising from incorrect
assembly, incorrect moun ng, or incorrect use of this product.
CAUTION
This TV mount must be securely a#ached to the ver cal wall. If the mount is not properly installed it
may fall, resul ng in possible injury and/ordamage.
Tools Required
5/32"(4mm)Drill Bit

Phillips Screwdriver

Note: The moun ng components and hardware supplied in this package are not designed for
installa ons to walls with steel studs or to cinder block walls. lf the hardware you need for your
installa on is not included, please consult your local hardware store for proper moun ng hardware
for the applica on.
User Manual
17.99.1214
3/5"(10mm)Masonry Bit

Stud Finder

Wrench or Socket Set

Carpenter's Level
