Value 17.99.1120 Installation Instructions

Installa on Instruc ons
VESA: 75 X 75 & 100 X 100mm
Maximum load capacity: 8 kg
17.99.1120
VALUE LCD Monitor Wall Mount Kit, 1 Joint, black
17.99.1121
VALUE LCD Monitor Wall Mount Kit, 2 Joints, black
Safety informa on
Read the en re installa on instruc ons before you start installa on and assembly. lf you have any
ques ons regarding any of the instruc ons or warnings, please contact your local distributor for
assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability
causing possible iniury.
Please closely follow the assembly instruc ons. Improper installa on may result in damage or serious
personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the suppor ng surface will safely support the combined weight of the equipment and
all a ached hardware and components.
Use the moun ng screws provided and DO NOT OVER TIGHTEN moun ng screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from children.
This product is intended for indoor use only. Using this product outdoor could lead to product failure
and personal injury.
IMPORTANT: Ensure that you have received all parts prior to installa on. lf any parts are missing or
faulty, contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use reqular intervals (at least every
three months).
1st step:
Use a tool to drill four holes in the wall. The distance between the holes has to be as shown below.
Insert expansion bolts into four drilled holes.
Place the access panel on the wall as showned below, with the four holes in the panel aligned with
the four holes in the wall.
Screw four self-tapping screws into the expansion bolts.
Note:
The installa on must be on a solid wall, and the depth of the drilled holes in the wall must be
consistent with the length of the expansion bolts.