Related Manuals for DOREMIDI FC-ONE
Summary of Contents for DOREMIDI FC-ONE
- Page 2 Single / Toggle / Reset / Increase / Decrease trigger modes. In addition, FC-ONE has a variety of MIDI output ports that can be connected to computers, USB MIDI device, and MIDI DIN devices.
- Page 3 (Note: When FC-ONE is working in "USB Host" mode, the USB HOST port can power the USB MIDI device. Please pay attention to whether the power of the DC adapter can meet the working power of the USB MIDI device.)
- Page 4 Configure pedal MIDI messages Click the "MODE" button to make FC-ONE work in "USB Device" mode (green light flashes), connect the USB to the computer, and the green light flashes after the connection is successful. (Note: If MIDI messages are not configured, the FC-ONE default value is MIDI CC = 64 (sustain).)
- Page 5 STATUS: Set the MIDI message type. FC-ONE supports configuring the MIDI message type to CC/PC/NOTE, as shown in the figure: (Note: CC: MIDI Continue Control, generally used to control various MIDI effects. PC: MIDI Program Change, generally used to change timbre or effects. NOTE: MIDI notes.)
- Page 6 4) Question: The USB HOST port does not work. Answer: Please follow the steps below: Make sure that the FC-ONE power supply is normal. If you use the USB HOST port to power USB devices, please make sure that the DC IN power can meet the working requirements of the USB device.
Need help?
Do you have a question about the FC-ONE and is the answer not in the manual?
Questions and answers