Soft-Pk Requirements - Secure Computing ADMINGUIDEREVA Manual

Requirements
1-4 Getting Started

Soft-PK requirements

Each system on which Soft-PK will be installed must meet the
requirements listed in Table 1-2
IMPORTANT: A remote system must only run one VPN client. If a VPN client program
such as SecureClient was previously installed on the remote system, ensure it is properly
uninstalled. See Chapter 4, "Installing and Working with Soft-PK" for details.
Table 1-2. System requirements for running Soft-PK
Category Requirement
Š
An IBM PC or compatible computer (portable or desktop)
Hardware
with at least a 75 Mhz Pentium microprocessor (or
equivalent).
Š
A non-encrypting modem (for use with dial-up
networking) or an Ethernet interface.
Š
At least 10 MB of free hard disk space.
Š
The recommended system RAM size:
Š
Microsoft Windows 95, 98, Me, NT 4.0, or 2000
Software
Professional.
Š
Dial-up Networking component of Microsoft Windows
and/or Ethernet LAN interface.
Š
If the remote system uses a modem, the end user must
have dial-up account with an Internet Service provider
(ISP) or a private corporate dial-up account.
networking profile for the ISP used to gain access to the
Internet.
Š
Microsoft Internet Explorer 4.0 or later (for using help)
.
— Windows 95: 16 MB
— Windows 98, NT: 32 MB
— Windows 2000, Me: 64 MB
TIP: Instruct Soft-PK users to follow the instructions
provided by Microsoft to install Dial-Up Networking
on their Windows machine. Also, create a dial-up