Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HDWR SecureEntry-CR50LF
Summary of Contents for HDWR SecureEntry-CR50LF
- Page 1 User Manual RFID reader for access control SecureEntry-CR50LF...
- Page 2 Table of contents Specifications: ................................3 Set contents: ................................... 4 Features: .................................... 4 Installation ..................................5 Wired connection ................................ 5 Comments ..................................5...
- Page 3 Specifications: • Warranty: 1 year • Device Type: RFID Reader with Access Control • Verification Type: RFID Card • Material: metal • Response Speed: Less than 0.2 seconds • Proximity Range: 3-10cm • Communication Distance: 100 meters • Data transfer: real-time •...
- Page 4 Set contents: • RFID reader for access control • Special Allen key Features: • Solid, metal, damage-resistant and water-resistant housing • Door can be unlocked with a 125 kHz RFID card • Can be connected to external devices and create an access control system •...
- Page 5 Installation Use a Phillips screwdriver to remove the screw between the panel and the motherboard. Then attach the motherboard to the sidewall with a dowel and screws. Wired connection Wiegand 26/34 RS485 RS232 DC 9V – DC 9V – 16V 9V –...
- Page 6 wires are spare). Data1 Data0 data cable is twisted pair cable, we suggest that the cross-sectional area should be at least 0.22 square millimeter. The length should not exceed 100 meters. Shielded GND wire connection, two-core cable will improve the reader's working efficiency (or the use of AVAYA multi-core cable).
Need help?
Do you have a question about the SecureEntry-CR50LF and is the answer not in the manual?
Questions and answers