Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HDWR SecureEntry-CR30LF
Summary of Contents for HDWR SecureEntry-CR30LF
- Page 1 User Manual RFID reader with access control SecureEntry-CR30LF...
-
Page 2: Table Of Contents
Table of contents Specifications: ................................3 Set contents: ................................... 4 Features: .................................... 4 Installation ..................................5 Wiring ....................................5 Function Table ................................7 Quantitative contents of the set ........................7... -
Page 3: Specifications
Specifications: • Warranty: 1 year • Type: RFID Reader with Access Control • Interface: Wiegand 26 • Verification Type: 125kHz RFID Card • Access Control: Yes • Supported Cards: 125 kHz • Voltage: 9-18V DC • Degree of protection: IP66 •... -
Page 4: Set Contents
Set contents: • RFID Reader with Wires • Mounting pins and screws • Manual Features: • IP66 rated for resistance to water ingress and low temperatures • Can be mounted outdoors • Support 125kHz RFID cards • Compact shape... -
Page 5: Installation
Installation • Two holes (A, C) for screws and one hole for cable (B) should be drilled in the wall. • Rubber pins should be placed in the holes (A, C). • The cable must be pulled through the wire hole (B). •... - Page 6 (Note: Brown and yellow wires are optional connections)
-
Page 7: Function Table
Function Table Card Reading The LED will turn green and the buzzer will beep, meanwhile, the reader will send a Wiegand signal External LED control When the input voltage for the LED is low, the LED will turn green External buzzer control When the input voltage of the buzzer is low, the buzzer will make a sound...
Need help?
Do you have a question about the SecureEntry-CR30LF and is the answer not in the manual?
Questions and answers