Table of Contents
Advertisement
FlashPath Floppy Adapter for MultiMediaCard
DDFLSPTH2-AD
FlashPath for IBM Compatible PCs
When using FlashPath in an IBM PC system, files may be moved both to and from a
MultiMediaCard via the FlashPath. It also comes with several utilities.
PC System Requirements
IBM-PC or fully compatible desktop or laptop PC.
• System requires 486 (or later) or Pentium processor
• Operating System: Windows 2000/ME/98/95/NT 4.0 (SP3+)
• Standard 3.5" Floppy Disk Drive as drive A: or B:
FlashPath is not compatible with removable floppy drives or external floppy drives
(serial, parallel, PC Card or USB).
FlashPath is not compatible with high-capacity drives such as the LS-120
SuperDisk Drive.
Non-Supported Systems:
• RISC based systems (Alpha AXP, MIPS R4x00, or PowerPC)
Driver Software Installation for Windows 2000/ME/98/95/NT4.0
Before using the FlashPath, you must install the device drivers located on the
accompanying CD-ROM. For the latest drivers you can visit www.delkin.com
SPECIAL NOTE FOR NTFS-BASED SYSTEM USERS: Because of the NTFS file
system security features, it is not possible to boot the system and access the hard
disk from a standard bootable DOS disk (e/g/ a Windows 98/95 recovery disk.
Therefore, prior to the installation of FlashPath software to Windows 2000, or any
system using NTFS, please ensure you have prepared a recovery disk set as detailed
in Microsoft's documentation.
Prior to any software installation always ensure you have backed up your hard drive
and prepared a recovery disk.
Figure 3:
Driver
Installation
Menu
Delkin Devices User's Manual
Page 3
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiMedia Card to Floppy Disk Adapter and is the answer not in the manual?