Fauser Elektrotechnik ZadPad Operating Instructions Manual

Multi analyser ZadPad with VLP light flicker probe
Operating Instructions Multi analyser ZadPad
Table of Contents
1. Safety Precautions, Warnings..........................................................................................1
2. Introduction.......................................................................................................................3
3. Device description............................................................................................................ 3
3.1. Operating and indication elements............................................................................3
3.2. Turn on/off.................................................................................................................4
3.3. Charging the battery and battery indicator................................................................4
3.4. Connecting the Sensor..............................................................................................4
3.5. Header info screen....................................................................................................4
3.6. USB Remote Anzeige...............................................................................................5
3.7. Main buttons..............................................................................................................5
3.8. Menu functions..........................................................................................................6
4. Measurement................................................................................................................... 7
4.1. Preparation for measurement...................................................................................7
4.2. Proceeding flicker measurement...............................................................................7
4.3. Saving Measured Values..........................................................................................7
4.4. Measurement Control via USB..................................................................................8
4.5. Standards and Directives..........................................................................................8
5. Annex............................................................................................................................... 9
5.1. Technical information................................................................................................9
5.2. Scope of delivery.....................................................................................................10
5.3. More information.....................................................................................................10
5.4. Waste disposal........................................................................................................10
1. Safety Precautions, Warnings
Please read these safety precautions carefully before using your meter. This will help you to avoid
damaging the product and prevent personal injury.
This symbol identifies important warnings which should be read in any case before
initial startup of the Multi analyser ZadPad.
In the event of malfunctioning, switch the meter off immediately.
If the event that smoke develops or unusual odors become apparent, which are
caused by either the meter or the power pack, disconnect from mains power immedi-
ately and switch the device off in order to prevent possible fire. Continuing to operate
the meter or the power pack after such malfunctions have occurred may result in
severe injury. Please contact your local dealer or Fauser Elektrotechnik Service in
order to eliminate malfunctioning.
Do not use the meter in proximity to flammable gases.
Electronic devices should never be used in proximity to flammable gases. Danger of
explosion and fire is otherwise immanent.
1