Advertisement
Quick Links
m
MOLLE Clip for Remote Speaker Microphone (RSM)
Quick Start Guide
*MN010689A01*
MN010689A01-AA
To find this leaflet online, refer to MN010689A01-AA at:
https://learning.motorolasolutions.com/User_Documentation
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and
the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC,
and are used under license. All other trademarks are
the property of their respective owners.
© 2024 Motorola Solutions, Inc. All rights reserved.
Printed in
PMLN8675A
Assembling the MOLLE Clip and Attaching the MOLLE Clip to the RSM
MOLLE Clip
Adapter
Remote
Speaker
Microphone
(RSM)
1. Screw (2×) the Blade-Tech® MOLLE-Lok® 3-INCH Bottom Section onto the MOLLE Clip Adapter.
2. Ensure the arrowhead icons on the RSM and on the MOLLE Clip Adapter have a matching orientation.
3. Slide the clip upwards to attach the MOLLE clip to the RSM.
Blade-Tech® MOLLE-
Lok® 3 INCH Top
Section
1
Blade-Tech® MOLLE-
Lok®3 INCH Bottom
Section
2
3
Advertisement
Related Manuals for Motorola solutions PMLN8675A
Summary of Contents for Motorola solutions PMLN8675A
- Page 1 2. Ensure the arrowhead icons on the RSM and on the MOLLE Clip Adapter have a matching orientation. © 2024 Motorola Solutions, Inc. All rights reserved. 3. Slide the clip upwards to attach the MOLLE clip to the RSM.
- Page 2 Removing the MOLLE Clip from the RSM Attaching the MOLLE Clip to MOLLE Webbing 1. Rotate the Blade-Tech® MOLLE-Lok® 90 degrees. 2. Lift up the bottom release latch using a small, flat-tipped tool. 3. Slide the clip to remove the MOLLE clip from the Remote Speaker Microphone (RSM). 4.
Need help?
Do you have a question about the PMLN8675A and is the answer not in the manual?
Questions and answers