Advertisement
Available languages
Available languages
Table of Contents
Item No.
1
2
Installing the Cradle
1.
Remove the screws and the cradle from the plastic bag.
2.
Attach RAM base to the cradle by tightening the four screws.
3.
With the cradle attached to the RAM base, install the device to RAM suction mount.
4.
Lock and unlock the suction mount by twisting the lock.
5.
Install the suction mount on smooth non-porous surface.
Note: For best result, install the suction mount on glass surface.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the
property of their respective owners.
© 2022 Motorola Solutions, Inc. All rights reserved.
Printed in
Vehicle Cradle and Mount
PMPN4638_
Quick Start Guide
1
Description
Arm, accessory kit, RAM mount
Vehicle Cradle
Loosen the short arm before adjusting the cradle.
M
2
Part No.
HW001865A01
HN002069A01
*MN009421A01*
MN009421A01-AA
Advertisement
Table of Contents
Related Manuals for Motorola solutions PMPN4638 Series
Summary of Contents for Motorola solutions PMPN4638 Series
- Page 1 Stylized M logo are trademarks or registered *MN009421A01* trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2022 Motorola Solutions, Inc. All rights reserved. MN009421A01-AA Printed in...
- Page 2 MOTOROLA, MOTO, MOTOROLA SOLUTIONS und das stilisierte M-Logo sind Marken oder eingetragene *MN009421A01* Marken von Motorola Trademark Holdings, LLC und werden unter Lizenz verwendet. Alle anderen Marken sind Eigentum ihrer jeweiligen Inhaber. © 2022 Motorola Solutions, Inc. Alle Rechte MN009421A01-AA vorbehalten.
Need help?
Do you have a question about the PMPN4638 Series and is the answer not in the manual?
Questions and answers