English
Change Contrast of Display
1. After entering Sys Function menu page, select Contrast by pressing MODE/CONFIRM to
increase or decrease the contrast of the display.
2. Push and hold MODE/CONFIRM button upward or downward to change the selection and
then press MODE/CONFIRM to confirm.
Online Mode
There are Multi Drive, Normal Only and encrypted Only.
Check Memory
After entering Sys Function menu page, select Memory Info by pressing MODE/CONFIRM
button to check the used memory. The used memory will be shown on the display.
Show Firmware Version
After entering Sys Function menu page, select Firmware Version by pressing
MODE/CONFIRM. The date code, version of the firmware will be shown on the display for
reference.
Firmware Upgrade
It will be used when there is an upgrade of firmware.
15