Recording Voice; Recording Mode - LENCO XEMIO-115 User Manual

Hide thumbs Also See for XEMIO-115:
Table of Contents

Advertisement

Recording Voice

1. After entering Main Menu page, select Record and press MODE/CONFIRM button to
enter Recording Voice mode.
Note: The recorded voice will be saved in .ACT and .WAV only.
2. The following display will be shown once you've entered Record Voice mode
3. Before recording, you may set your REC type. Press MODE/CONFIRM and then Press
PREVIOUS/ NEXT button to select REC type.
4.
There are four recording modes available: Fine REC, Long REC, Long VOR and Long
VOR respectively.
5. Put the sound source near the built-in microphone. Press MODE/CONFRIM button to
confirm the selection and the press PLAY to start recording. You are allowed to press
PAUSE/STOP button to pause or stop the recording.
When you finished the recording, press and hold PAUSE/STOP button. Release the button
when the wording of "Saving..." shows on the display. The recorded audio files will be saved
under Root Directory as default. Refer to Change Directory section for details.

Recording Mode

Fine REC
Fine REC performs High recording quality but the file size is relatively larger than Long
REC.
Long REC
Long REC performs Low recording quality but the file size is relatively smaller than Fine
REC.
Fine VOR
The voice recording starts once you press the 'PLAY' button.
Long VOR
The voice recording starts when there is a sound. If there is no any sound, the recording
will pause. It will resume to record when there is a sound.
Fine REC
Long REC
Fine VOR
Long VOR
12
English

Advertisement

Table of Contents
loading

Table of Contents