LENCO TFT-1021 User Manual page 31

The screen is close and power
LED is on.
The remote control is not working.
Don't display the subtitle
When the machine tries to find
and store channels you get the
message "No signal"
When only very few of the
expected number of channels are
found.
During the channel searching
process, the buttons or remote
controller's keys are insensitive.
Can't play the music file correctly
Can't play the video.
Picture or video doesn't full screen The resolution of the files not
Battery exhausted.
Battery exhausted.
Remote control is incorrectly
aimed
The program signal no subtitle
date
The subtitle don't open or
signal is too weak
The aerial is not properly
connected to the machine.
The aerial is not correctly
directed towards the trans-
mitter.
The aerial is not suitable for
digital channels.
The signal is too weak for the
connected aerial.
There are no terrestrial
digital transmissions in the
area.
Since the channel searching
process use a lot of system
resource, the system scan
keys or buttons will become
very slow.
The file is damaged or code is
wrong
The format of the video doesn't
compatible or file
damaged.
suitable
27
Change battery.
Change battery.
Aim the remote control at
box.
Check that nothing blocks
the front panel.
Try press the S.TIT button
open the subtitle.
Make sure the signal is good
Check the aerial ins- tallation
including its connections.
Check that the aerial is
directed towards the trans-
miters.
Check that digital
missions are available in the
area.
If things does not work out as
they should, let the local TV
dealer check whether the
aerial is intended
receiving digital
missions or not. If not you
have to exchange the aerial.
Try press buttons or remote
controller's keys
times.
Change the right files.
The max bit-rate of the video
is 8Mbps.
has
Change the files
trans-
for
trans-
several