Table of Contents
Advertisement
BASIC OPERATION
NUMBER BUTTONS
1). While playing songs, press the numeric buttons to directly select the songs you need.
2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and
then pressing a numeric button (1--10). For example: If the 16th song is needed, you can press the 10+
button followed by the 6.
PROGRESSIVE SCAN/INTERLACE
Press the INT./P.SCAN button to switch four video output modes: INTERLACE-YUV,
TV-RGB, P-SCAN YPBPR, S-VIDEO.
Note: If the TV image is abnormal, please first confirm the correspondence between DVD
setup and TV scanning mode.
STANDBY
Press the Power button on the remote control can open or close the unit. Before you
perform the operation, make sure the main power is on.
Note: This standby function is one kind of saving electricity modes. When the device does
not be used for a long time, please close the main power.
INPUT SELECTION
Correctly connect the outer equipment (e.g. PC computer) with this unit, then press the
Audio button on the front panel or remote control to enter Audio status to enjoy the outer
audio source.
Press the FM button on the remote control or front panel to select tuner.
Press the Play/Enter button or DVD button on the front panel to select DVD mode. The unit
will start playing if there is a disc inserted.
FUNCTION
If you want to adjust the volume of Treble, Bass or Subwoofer. First to press the Function
button, select to the corresponding item and press Vol+/- button on the remote control can
increase or reduce the volume of Treble, Bass or Subwoofer.
ZOOM
In play status every time the Zoom button is pressed, the TV screen will be zoomed in or
out proportionally. In case of zoom proportion more than 1, pressing direction button is able
to move the picture, continuously press the button, "Zoom in 2,3,4,1/2, 1/3,1/4, Zoom
in :"off" will be displayed.
-13-
Advertisement
Table of Contents
