Aerial Connections; Connecting To External Audio Source - LENCO MDV-5 Instruction Manual

3.3 Aerial Connections

FM Aerial
Connect the plug on the supplied FM pigtail aerial to the centre pin of the 75-ohm
socket on the rear of the tuner component. If reception is poor, use a 75 ohm
coaxial cable (not supplied) to connect the system to an outdoor FM aerial.
MW Aerial
Connect the MW loop aerial to two MW aerial terminals on the rear of the tuner
component.
FM AERIAL

3.4 Connecting to External Audio Source

Connect an external audio source using a twin RCA (normally red and white) to
the AUX input on the rear of the amplifier component.
External
audio
source
3. Connections
MW AERIAL
11