Adjust The Angle Of The Display - LENCO M-7001 Owner's Manual

INSTALL THE SCREEN ON THE BRACKET
Insert the position plate on the screen unit into the clip screw plate and screw on the
clip screw to fix the screen unit to the Mounting Bracket.
Position plate
(5) Position Clip-screw
Rotate Bracket
(6) Clip screw

ADJUST THE ANGLE OF THE DISPLAY

1. Loose the clip screw on the side of the rotate bracket, then adjust the Mounting
Bracket to the angle of the display to your need and screw on the clip screw to fix the
Mounting Bracket.
Clip screw
2. In order to adjust swing arm, you must first loosen as indicated by diagram with
appropriate screwdriver.
Adjusted by force will damage the Screen Mounting Bracket.
GB-7