Advertisement
Quick Links
ColorFacade - Wall Grazing
SS2-RGBW-5L-16
40" Adjustable RGBW Linear Flood/
Spot DMX Light
The SS2 Series are active, top-of-the-line RGBW color changing fixtures that can be used in indoor or outdoor projects. They
draw on solid-state elements, to produce highlights and washes in architectural spaces. RGBW is an acronym for Red Green
Blue and White. RGBW LED color mixing luminaires have the potential to produce 4.3 billion colors and 16.7 million white
light tones.
When installed and operated according to this manual, these fixtures will operate safely and dependably for their rated
lifespan. These luminaries require a USITT DMX 512 control signal on four consecutive channels total. The unit includes a
DATA OUT output for connection to additional units or other DMX512 devices.
SCOPE
The purpose of this manual is to show proper use and installation of color-changing flood lights for peak performance. This
manual must be complimented by additional references, consultation from qualified professional(s), and observance of state
and local codes and regulations. This rule applies to any interior structure, exterior structure, or environment.
Therefore, it is important to: please read and comply with all instructions and warnings in this manual when installing or
using this product.
THIS MANUAL INTENDED FOR electrical contractors, electrical engineers, and licensed electricians.
ADDITIONAL SUPPLY OPTIONS
•
DMX512 compatible controller (optional)
•
DMX extension (optional)
•
DMX feed connector
•
4x4 inch electrical junction box rated for the application (optional)
•
Controller (DMX512 compatible)
•
Proper mounting bolts, washers, and lock washers to secure the fixture to the mounting surface
SAFETY HAZARD ICON KEY
DANGER = avoiding
WARNING = avoiding this warning may result may in serious injury or death.
CAUTION = not exercising caution may result in minor to moderate injury, or property damage.
SAFETY HAZARD PRECAUTIONS
DANGER: Not turning off the main power before wiring, installing, connecting, or disconnecting this product may
result in serious injury, or death.
WARNING: Not following NEC codes, local codes, or consulting a certified professional may result in property
damage, serious injury, or death.
INSTRUCTIONS
pending
danger will result in serious injury or death.
1
|
Advertisement
Related Manuals for Coloronix ColorFacade SS2-RGBW-5L-16
Summary of Contents for Coloronix ColorFacade SS2-RGBW-5L-16
- Page 1 ColorFacade - Wall Grazing INSTRUCTIONS SS2-RGBW-5L-16 40" Adjustable RGBW Linear Flood/ Spot DMX Light The SS2 Series are active, top-of-the-line RGBW color changing fixtures that can be used in indoor or outdoor projects. They draw on solid-state elements, to produce highlights and washes in architectural spaces. RGBW is an acronym for Red Green Blue and White.
- Page 2 CAUTION: Do not look directly into beam, with or without optical instruments. Note: Instructions and warning referenced in this installation guide are not necessarily all-inclusive, all conceivable, or all relevant to all applications as Coloronix by Nova Flex cannot anticipate all conceivable or unique situations PLANNING FOR INSTALLATION Unpacking: Use the packing list to ensure all accessories are included.
- Page 3 INSTRUCTIONS SS2-RGBW-5L-16 Operation Mode Transformation: Press ‘MODE’, ‘UP’ or ‘DOWN’ to transform menus DMX Mode: Press the ‘SET’ button to enter and select using ‘UP’ or ‘DOWN’ buttons Address 001 – 512 Channels 4/6/9-ch DMX Channel Sheet Function DMX Value Setting 4 Channels 6 Channels...
- Page 4 INSTRUCTIONS SS2-RGBW-5L-16 Slave Mode: “SLAV”: After connecting the DMX cable, the light will run with the main fixture at the same step. Auto run mode “AUTO”: Lights can circularly run according to the speed and strobe of built-in Program Mode: 02 – Program Mode: 14 Built-in Program: There are 14 built-in programs.
- Page 5 INSTRUCTIONS SS2-RGBW-5L-16 Dimming Speed - press the setup button to enter and select by the ‘UP’ or ‘DOWN’ button: Fast Dimmer Speed Smooth DMX Fail – console DMX signal clear - press the setup button to enter and select by the ‘UP’ or ‘DOWN’ button: DMX signal connection fail, light off DMX Fail DMX signal connection fail, lighting keeps current state...
- Page 6 INSTRUCTIONS SS2-RGBW-5L-16 RDM (Remote Device Management) This product supports RDM communication protocol. RDM is a protocol that supports two-way traffic in the standard DMX512 protocol. RDM controls devices and configurations, and detects lights, changing the DMX address of the fixture, DMX mode, etc.
- Page 7 INSTRUCTIONS SS2-RGBW-5L-16 MENU INFO REFERENCE TABLE Menu 1 Menu 2 Menu 3 Menu 4 Functions 1. Address 001 - 512 1: DMX Console Mode 2. Channels 4/6/9 - CH 2: Slave Slave Mode 3: AUTO Auto Run Mode 1. Effect Mode 1 - 14 Built-in Program Mode 2.
- Page 8 INSTRUCTIONS SS2-RGBW-5L-16 MOUNTING AND ALIGNMENT OF FIXTURE 1. Mount and secure each fixture into the designated position in accordance to the installation plan. Ensure there is sufficient cable length between the fixture and junction box to allow for final alignment of the fixture. 2.
- Page 9 TROUBLESHOOTING If problems occur during usage, unplug the product immediately and email cs@coloronix.com or call 1.800.515.4880. Replacing a Failed Fixture: “Hot Swapping” a fixture is not allowed. If a fixture needs to be replaced, the steps are to: 1.
Need help?
Do you have a question about the ColorFacade SS2-RGBW-5L-16 and is the answer not in the manual?
Questions and answers