JVC DLA-NZ700 Instructions Manual page 44

Picture Adjust
You can further configure the detailed settings for "Picture Mode".
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ "Setting the Picture Mode" (P. 29)
LD Power
Controls the brightness of the light source by controlling the LD current.
Setting range: 0 to 100
0
Dynamic CTRL
Expands the dynamic range of video expression through controlling the brightness of the light source based on image
analysis.
Setting
Off
Low
High
Balanced
Aperture
For changing the brightness through controlling the aperture.
Setting range: -15 (stops down) to 0 (opens up)
0
Contrast
For adjusting the white level point to avoid clipping or over saturation.
Setting range: -50 (little difference in brightness) to +50 (large difference in brightness)
0
Brightness
For adjusting the black level point to avoid clipping or over saturation.
Setting range: -50 (darker) to +50 (brighter)
0
Color
For adjusting the color saturation of the video image.
Setting range: -50 (lighter) to +50 (deeper)
0
Tint
For adjusting the hue of the video image.
Setting range: -50 (reddish) to +50 (greenish)
0
44
Does not control.
Maintains the peak brightness while automatically optimizing laser light source
control and video signal. Weaker control than "High".
Maintains the peak brightness while automatically optimizing laser light source
control and video signal to produce a solid black tone throughout the entire video
image.
Adjusts both the shadows and highlights moderately while suppressing the peak
brightness. Enhances the depth and reality of the scene.
Description