Aiwa NSX-A111 Operating Manual page 13

(—'3,7,
8;9'
5-+ .7Tj 5
4,5
3,7,
8,9
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1
2
3
4
.5
Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with +4,
Press CD and load the disc(s).
Press CD EDIT/CHECK twice while pressing
SHIIFT on the remote control.
"EDIT" and "PRGM" are displayed,
@ When "Al" is displayed, press CD EDIT/CHECK while
pressing SHIFT again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified,
9 The + and ~ are also available to designate the tape
length,
Tape side A (front side)
Tape length
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIFiECT PLAY 2, then press +10 and O.
Selected track number
Remaining time on side A
Program number
Programmed tracks
6
7
8
9
Repeat step 5 for the rest of the tracks for side '
A.
~
i!
~i
,,
:. .ay,~:
A track whose playing time is longer than the remaining time ",) ~
cannot be programmed,
!1 1!
,,,
E
'...
y,, ,,:.
Press CD EDIT/CHECK while pressing SHIFT on "~
the remote control to select side B and program "'~
the tracks for side B.
After confirming "Bon the display, repeat step 5.
Tape side B (reverse side)
Press CD EDiT/CHECK while pressing SHIFT on
the remote control to select side A and press
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously, When the end of tape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
"B" is displayed.
10 Turn over the tape in deck 1 and press to start
recording.
Recording starts.
To stop recording
Press /A on deck 1, Recording and CD play stop
simultaneously.
To
check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press - or
- repeatedly.
Tape side Program number
Track number Programmed
track numbers
To
change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press CLEAR twice so that "EDIT disappears on the display.
Up to 30 tracks can be programmed from any of the inserted
discs.
"FUL12 is displayed if you attempt to program more than 30
tracks.
ENGLISH I
3