Page 1
READ ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USING THIS PRODUCT. Save these instructions for future reference. Failure to read and follow the warnings and instructions within this instruction manual could result in property damage, serious injury or death. FloodStop® Pump Tech Support: 1-833-786-7779...
Page 2
WARNING! The FloodStop® System has not been investigated for use in or around swimming pools, marine areas, recreational water installations, decorative fountains or any installation where human contact with the pumped fluid is common.
Page 3
MATERIALS REQUIRED (NOT INCLUDED) 1-1/2” ABS or 1-1/2” Threaded Thread Tape Adaptor PVC Pipe ABS or PVC 1-1/2” Check Cement 1-1/2” 90˚ (to match the Valve Elbow pipe) NOTE: Parts are not shown to scale. FloodStop® Pump Tech Support: 1-833-786-7779...
Page 4
This pump was not designed to handle salt water, brine, laundry discharge, water softener NOTICE discharge or any other application that may contain caustic chemicals. Damage to the pump may occur and will void the pump’s warranty. FloodStop® Pump Tech Support: 1-833-786-7779...
Page 5
• Unscrew the stainless screws, and remove the base. • Use a flathead screwdriver to hold the shaft, then turn the impeller counterclockwise to release the impeller. • Remove debris from around the shaft and on/under the impeller. • Reassemble the pump. FloodStop® Pump Tech Support: 1-833-786-7779...
Page 6
4. Pump undersized for application discharge line. 5. Check valve stuck closed or installed 4. Recheck all sizing calculations to backwards determine proper size. 5. Remove and examine check valve. FloodStop® Pump Tech Support: 1-833-786-7779...
Need help?
Do you have a question about the FSPP33TTDV10 and is the answer not in the manual?
Questions and answers