Ba�ery Charging
1. Connect the charging adapter cable to the corresponding port
on the massager
3. Plug the charging adapter into an outlet.
4. Normally it takes 2.5-3 hours to fully charge the ba�ery.
5. Indicator light on POWER Bu�on :
- When POWER bu�on indicator turns green and blink, that
means the ba�ery is low, please charge in �me.
- While charging, the POWER bu�on indicator light will turn
'RED' and blink.
- When fully charged, the POWER bu�on indicator will keep
'RED' and not blink
- If the ba�ery is full, the massager can work con�nously for
around 80 minutes.
6. It is safe to use the massager whilce charging.
NOTE:
A�en�on ! Please only use provided charging adapter.
Safety Instruc�ons
READ ALL INSTRUCTIONS BEFORE USE. SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT SAFEGUARDS:
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
5
Need help?
Do you have a question about the SL-482 and is the answer not in the manual?