Snailax SL-482 Use & Care Manual page 4

Instruc�ons for use
1. Turn off the massager before replacing another massage head.
2. Your massager comes equipped with 4 a�achments (Figure 1).
A�ach the different heads by twis�ng clockwise (Figure 2), detach
the installed massage head by twis�ng an�-clockwise and pulling
out (Figure 3). Always turn off the device while replacing the heads.
Fig.2
3. Turn on the massager by opera�ng the control bu�ons
(insturc�ons as below)
4. Apply the massager head lightly to the area you wish to treat.
Move the unit slowly, holding it over the targeted area. Treat the
area for a short period of �me and move to
another area. NEVER treat the same area for longer than 3 minutes.
5. To turn the unit off by pressing the power bu�on. For your safety
the device will automa�cally turn off a�er 15 minutes of con�nuous
use.
Intensity Bu�on
Press to choose High,
Medium,Low
intensity of vibra�on
Heat Bu�on
Press to turn the
Heat func�on
on or off
Fig.3
Mode Bu�on
Press to change Mode
between M1 to M3
Power Bu�on
Press to turn the
massager on/off
NOTE: When Power
bu�on indicator turns
green and blink, that
means the ba�ery is low,
please charge in �me.
It is safe to use the
massager while charging.
4