ATOMIC MASS GAMES STAR WARS SHATTERPOINT SWP16 (A) -THE ARMORER Manual

Download this manual

A04

A03

ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE.

SWP16 (A)-THE ARMORER

READ THIS FIRST

Be sure to use a pair of sharp hobby clippers to remove the miniature components from the frame. Carefully clean the excess material and mold lines

via sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution

with all products and follow all manufacturer instructions. Adult supervision is recommended for children under the age of 16. Have fun!

JOIN THE COMMUNITY

Use #ShatterPaint to share your miniature photos and

be a part of the Star Wars™: Shatterpoint community!

A02

ALTERNATE

BUILD

A01

AtomicMassGames

A05

A09

A08

A06

A07

AtomicMassGames

Atomic_Mass_Transmissions

FINAL

Need help?

Do you have a question about the STAR WARS SHATTERPOINT SWP16 (A) -THE ARMORER and is the answer not in the manual?

Page 1 SWP16 (A)-THE ARMORER READ THIS FIRST Be sure to use a pair of sharp hobby clippers to remove the miniature components from the frame. Carefully clean the excess material and mold lines via sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution with all products and follow all manufacturer instructions.
Page 2 SWP16 (B)-PAZ VIZSLA FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 3 SWP16 (C)-COVERT MANDALORIAN (MALE) FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 4 SWP16 (D)-COVERT MANDALORIAN (FEMALE) FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...