ATOMIC MASS GAMES STAR WARS SHATTERPOINT SWP12 Assembly

Download this manual

A01

A02

A08

ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE.

SWP12 (A)-GRAND INQUISITOR

READ THIS FIRST

Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully clean the excess material and mold lines

wia sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution

with all products and follow all manufacturer instructions. Adult supervision is recommended for children under the age of 16. Have fun!

JOIN THE COMMUNITY

Use #ShatterPaint to share your miniature photos and

be a part of the Star Wars™: Shatterpoint community!

A03

FINAL

A09

ALTERNATE

HEAD

A07

AtomicMassGames

A04

AtomicMassGames

Atomic_Mass_Transmissions

A05

A06

Need help?

Do you have a question about the STAR WARS SHATTERPOINT SWP12 and is the answer not in the manual?

Page 1 SWP12 (A)-GRAND INQUISITOR READ THIS FIRST Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully clean the excess material and mold lines wia sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution with all products and follow all manufacturer instructions.
Page 2 SWP12 (B)-REVA FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 3 SWP12 (C)-FOURTH SISTER FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 4 SWP12 (D)-FIFTH BROTHER ALTERNATE HEAD FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...