IMPORTANT SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This lightning flash with arrowhead Warning: to reduce the risk of The exclamation point within an...
POWER Indicator 17. Radio Tuning Window ALARM OFF/POWER Button 18. TUNING Control CLK.ADJ/PROG./P-MODE/FILE+10 19. FM.ST/RANDOM/WEEKEND Button Indicator FUNCTION Button 20. LED Display ALARM 1 Button 21. Battery Compartment Disc Compartment 22. FM/REPEAT Indicator CD Door Open/Close 23. Phones Jack SNOOZE/WEEKEND SET Button 24.
Page 5
Adjusting the Wake-up Times and Selecting Wake-up Mode This clock radio has two separate wake-up alarms that can be set and used independently. To set or adjust the wake-up times, please proceed as follows: 1) Depress and hold the AL1 button for at least two seconds until just the Hour digits and the AL1 (Alarm 1) indicator are flashing.
Page 6
Dimmer Control The display DIMMER selector switch located on the right side cabinet was set to the HIGH position at our factory. If you find the display to be too bright for sleeping, slide the DIMMER selector switch to the LOW position. Sleep To Music Timer You can use the sleep timer to fall asleep to the Radio, CD player or USB/SD/MMC music up to 90 minutes and have the unit shut off automatically.
Page 7
6) To pause briefly during playback press the CD PLAY/PAUSE button. The track number being played flashes. The sound stops, but the disc continues to spin. Press CD PLAY/PAUSE button again to cancel pause and resume playback. 7) To skip forward or backward to other tracks repeatedly press the F.REV or F.FWD button until the desired track number appears in the display.
Page 8
Program Tracks Program tracks of disc are possible when playback is stopped. Up to 32 tracks can be stored in the memory in any order. 1. In stop mode, press the CLK.ADJ/PROG./P-MODE/FILE +10 button to enter program setting, the display will show .
Stereo Headphones/Earphones Jack A Stereo Headphones/earphones Jack has been provided on the front left lower part of the set so that you can listen to the set without disturbing others. To use this jack, plug in low impedance stereo headphones/earphones (not included) and adjust the VOLUME Control for your listening pleasure. Special internal switches will turn off the set's speakers when you plug in the stereo headphones/earphones.