Page 1
DELUXE ALARM CLOCK STEREO RADIO COMPACT DISC PLAYER CR-2400 CD INSTRUCTION MANUAL...
Page 2
INTRODUCTION Thank you for purchasing our product. You now possess a stylishly designed quality deluxe stereo Compact Disc Player/Alarm Clock Radio. Used carefully and in accordance with the instructions set out below your stereo Compact Disc Player/Alarm Clock Radio should give you many years of trouble free service. Please read the instructions carefully to obtain the best results from your purchase.
Page 3
IDENTIFICATION OF CONTROLS 1. AUTO/ALARM SWITCH 14. MINUTE SET BUTTON 2. CD PROGRAM BUTTON 15. VOLUME DOWN BUTTON 3. CD SKIP BACKWARD BUTTON 16. VOLUME UP BUTTON 4. CD SKIP FORWARD BUTTON 17. SLEEP BUTTON 5. CD STOP BUTTON 18. TIME SET BUTTON 6.
POWER SOURCES MAINS POWER Plug the AC MAINS POWER PLUG into the standard household AC receptacle. The L CD display will show 0:00. Warning: Before insert the MAINS POWER PLUG into the household receptacle, please make sure the AC VOLTAGE SELECTOR MUST be set to your local voltage.(optional) BATTERY STANDBY Connect a 9V battery (note: not supplied) into the BATTERY COMPARTMENT to keep the...
Page 5
SLEEP (AUTO-STOP) FUNCTION To switch off the CD or RADIO playing automatically in 90/60/30/10 minutes before you fall asleep, start RADIO or CD playback, press the SLEEP BUTTON, each time you press, the LCD display will show 90/60/30/10 sequently, then slide the ALARM/AUTO selector to AUTO. After 90/60/30/10 minutes, the playback will stop automatically.
Page 6
USING THE CD LOADING A DISC 1. Set the FUNCTION switch to CD position. 2. Open the CD door. 3. Place an audio CD into the tray with the label side facing up. 4. Close the CD door. The total number of tracks will appear on the display. 5.
To Erase the Memory(Program) To clear the program, you may have two ways: 1. Press STOP button when the disc stopped, or 2. Open the CD compartment lid, program will be erased. REPEAT You can play one track or all tracks on the disc repeatedly. To Repeat a Single Track 1.
Need help?
Do you have a question about the CR-2400 and is the answer not in the manual?
Questions and answers