GE JX7227 Installation Instructions

Installation
Instructions
Questions?
Call GE Answer Center at 800.626.2000 or
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
instructions for local inspector's use.
IMPORTANT –
•
governing codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
future reference.
• For easier installation and personal safety, we recommend
that two people install this microwave oven.
• Unplug the microwave oven before attempting
installation of this kit.
FOR YOUR SAFETY:
WARNING –
installation, switch power off at service panel and lock
the service disconnecting means to prevent power from
being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.
TOOLS YOU WILL NEED
#2 Phillips
screwdriver
Pencil
Awl or punch
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
Save these
Observe all
Be sure to leave these
Keep these instructions for
Before beginning the
Drill with " bit or #35
7 64
Scissors (optional) Tape measure
.
Built-In Trim Kits
JX7227/JX7230/JX2127SH/JX2130SH
Visit our Website at:
• Skill level – Installation of this appliance requires basic
mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
• This kit is UL listed for installation alone or over
any General Electric/Hotpoint single electric wall oven.
PARTS INCLUDED
PART
Trim Frame
Bottom Duct
Top Bracket
Phillips Round-Head
Screws
Phillips Flat-Head
Screws
Anti-Tip Bracket
Bottom Bracket
Template
1
www.GEAppliances.com
QUANTITY
24
(21 or 22 required
for installation)
(4 required
for installation)
1
1
1
5
1
1
1