Related Manuals for v.LOGiC V5-CCC-PNP
Summary of Contents for v.LOGiC V5-CCC-PNP
- Page 1 Intelligent Solution Interface V5-CCC-PNP Compatible with E-series BMW and Mini with navigation system or radio and 6.5” or 8.8” monitor with 10pin BMW LVDS connector Version 05.04.2024 V5-CCC-PNP...
-
Page 2: Product Features
• Picture-in-picture mode combining after-market rear-view and front camera picture(s) with factory parking sensor graphics • Compatible with all factory video accessories (e.g. rear-view camera, Top-View, nightvison, DVD-changer, TV-tuner) • USB update-port for software-updates by consumer Version 05.04.2024 V5-CCC-PNP... -
Page 3: Table Of Contents
4.3. Selecting the interface as current video source 4.4. Controlling of the connected SMART-LINK module 4.4.1. Controlling by 1- and 2-button iDrive 4.4.2. Controlling by 2-button iDrive in Mini 5. Specifications 6. Connections (interface-box) 7. Technical support Version 05.04.2024 V5-CCC-PNP... -
Page 4: Legal Information
To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Version 05.04.2024 V5-CCC-PNP... -
Page 5: Prior To Installation
Check compatibility of vehicle and accessories Requirements Navigation E-series and Mini with navigation system or radio with 6.5” or 8.8”monitor with 10pin BMW LVDS connector Note ”PDC – picture in picture” function is only for 8.8“ monitor available Version 05.04.2024 V5-CCC-PNP... -
Page 6: Setting The Dip Switches Of The Interface-Box V5C-M631
M-ASK - version 2 CCC - version 1 CCC - version 2 After each change of the DIP switch settings you have to execute a power reset of the interface-box! 1.4. LED‘s of the interface-box V5C-M631 Valid%input source CAN%ok Power Version 05.04.2024 V5-CCC-PNP... -
Page 7: Connection Schema
2. Connection schema Version 05.04.2024 V5-CCC-PNP... -
Page 8: Installation
Quadlock connector of harness TV-BM01 at the same position. Connect female Quadlock connector of vehicle harness to the male Quadlock connector of harness TV-BM01. Connect female Quadlock connector of harness TV-BM01 to the male Quadlock connector of the head unit. Version 05.04.2024 V5-CCC-PNP... -
Page 9: Lvds Connection
10pin BMW LVDS connector (LVDS-IN) on the front of the interface-box V5C-M631. Connect the female 10pin BMW LVDS connector of the LVDS cable V4C-LVDS10 to the male 10pin BMW LVDS connector of the factory monitor. Version 05.04.2024 V5-CCC-PNP... -
Page 10: After-Market Front Camera
The pink wire of harness V5C-UNI01 can be used for +12V electric power supply (max. 1A) of the after-market front camera. Configure in the OSD- menu “MISC”, menu item “POWER OUT 2” the designated electric power supply (see chapter “Configurable switching outputs”). Version 05.04.2024 V5-CCC-PNP... -
Page 11: Settings For Connecting An After-Market Front Camera
(e.g. radio). After deactivation you can’t enable the parking process again until the vehicle is diving faster than 20km/h, the ignition is switched off and on or the PDC will be disabled and enabled again, if existing. Version 05.04.2024 V5-CCC-PNP... -
Page 12: After-Market Rear-View Camera
The green wire of harness TV-BM01 can be used for +12V electric power supply (max. 1A) of the after- market rear-view camera. Configure in the OSD- menu “MISC”, menu item “POWER OUT 2” the designated electric power supply (see chapter “Configurable switching outputs”). Version 05.04.2024 V5-CCC-PNP... -
Page 13: Settings For Connecting An After-Market Rear-View Camera
The interface turns off, if PDC or reverse gear is enabled and it displays factory rear-view INPUTS camera and/or PDC-display For vehicles with PDC button. Enabled while Reverse Logic Intelligent parking process and up to 20 km/h or together with PDC if existing Version 05.04.2024 V5-CCC-PNP... -
Page 14: Smart-Link
SMART-LINK module. Configure in the OSD-menu “MISC”, menu item “Power Out 1” the setting “CAN” (see also chapter “Configurable switching outputs”). Connect the SMART-LINK interface control port “STA-UART” (available separately) to the "SMART-LINK CarPlay® Android Auto®" socket of V5C-UNI01 harness. Version 05.04.2024 V5-CCC-PNP... -
Page 15: Smart-Link Audio Connection
You have to configure some settings in the OSD-menu INPUTS if you want to connect the SMART-LINK module (Operation of the OSD: see chapter “OSD-Operation”). OSD-menu Menu item Setting Explication No front camera/SMART-LINK connected INPUTS Enables the " FRONT CAM" input and control SmartPhone for the SMART-LINK set Version 05.04.2024 V5-CCC-PNP... -
Page 16: Configurable Trigger Outputs
+12V when the interface is on (red LED on) Ignition +12V when ignition is on +12V when the rear-view camera input is POWER OUT1 RearCam activated (pink) MISC POWER OUT2 (green) Reverse Gear +12V when reverse gear is engaged Trigger putput deactivated Version 05.04.2024 V5-CCC-PNP... -
Page 17: Picture Settings
= 24:10 full screen mode OK ◦ AV + LVDS = 16:9 picture on left side, factory picture on right side 6.5” 16:9 monitor: ◦ FULL = 16:9 full screen mode ◦ 4:3 = 4:3 picture central OK Version 05.04.2024 V5-CCC-PNP... -
Page 18: Operation
You can change the basic configurations of the interface in the OSD (on screen display). 4.1.1. OSD – Operation You can control the OSD by iDrive. 4.1.1.1. 1- and 2-button iDrive Options Options Long: enter OSD Back + leaving OSD Short: OK Options Version 05.04.2024 V5-CCC-PNP... -
Page 19: 2-Button Idrive In Mini
(Operation of the OSD: see chapter “OSD-Operation”): OSD-menu Menu item Setting Explication H POSITION 0-xxx Horizontal position of the OSD V POSITION 0-xxx Vertical position of the OSD VERSION X.XX.XX Displays the current SW-version MISC FACTORY RESET Resetting to factory settings Version 05.04.2024 V5-CCC-PNP... -
Page 20: Video-In-Motion Function
Explication Video-in-motion activated MISC Video-in-motion deactivated For the V5-CCC-PNP the video-in-motion function is permanently active without disturbing the navigation performance. 4.3. Selecting the interface as current video-source In BMW in the vehicle`s Entertainment menu activate AUX and in Mini in the vehicle’s CD/Multimedia menu, activate AUX front by iDrive and after it long press MENU button (1- and 2-button iDrive + Mini) to choose the interface as current AV-source. -
Page 21: Controlling Of The Connected Smart-Link Module
The picture shows which functions of the connected SMART-LINK module can be executed by iDrive control panel. Once the FVC/SmartPhone input is activated the iDrive control panel action will execute the function described in the picture. 4.4.1. Controlling by 1- and 2-button iDrive Version 05.04.2024 V5-CCC-PNP... -
Page 22: Controlling By 2-Button Idrive In Mini
4.4.2. Controlling by 2-button iDrive in Mini Version 05.04.2024 V5-CCC-PNP... -
Page 23: Specifications
Mini8USB 7. Technical Support CAS GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@casgermany.com Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 05.04.2024 V5-CCC-PNP...
Need help?
Do you have a question about the V5-CCC-PNP and is the answer not in the manual?
Questions and answers