1. Manuals
  2. Brands
  3. Buzzaudio Manuals
  4. Stereo Equalizer
  5. 500 Series
  6. User manual

Buzzaudio 500 Series User Manual

Compatible equalizer module
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Thank you for choosing the Buzz Audio Tonic Equalizer
module. Please take the time to read this manual so
that you are familiar with the operation of the unit.
To gain our Extended Warranty, please register your
purchase online at www.buzzaudio.com
TONIC
Contents
1] Compatibility and Power ................................. 2
2] Installation ......................................................... 3
500 Series Compatible Equalizer Module
3] Controls and Indicators ................................... 4
4] HPF Frequency Setup ...................................... 7
5] Specifications .................................................... 8
Users Manual
6] Warranty and Service ...................................... 9
TONIC USERS MANUAL VERSION-2, JAN 2018.
CONTENTS COPYRIGHT BUZZ AUDIO LTD 2007.
www.buzzaudio.com
email management@buzzaudio.co.nz
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 500 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Buzzaudio 500 Series

Summary of Contents for Buzzaudio 500 Series

  • Page 1: Table Of Contents

    TONIC Contents 1] Compatibility and Power ......... 2 2] Installation ............3 500 Series Compatible Equalizer Module 3] Controls and Indicators ........4 4] HPF Frequency Setup ........7 5] Specifications ............ 8 Users Manual 6] Warranty and Service ........9 TONIC USERS MANUAL VERSION-2, JAN 2018.

  • Page 2: Compatibility And Power

    4 consumes more power supply current than most other 500 series modules available due to the True Class A of this manual. amplifiers used in the design. For this reason, there may...

  • Page 3: Controls And Indicators

    3] Controls and Indicators [1] HIGH This centre detented pot controls the amount of boost and cut of the high (treble) band. The 12 o’clock “0” mark is flat response (no boost or cut applied). +/- 15db range is provided. [2] 11kHz - 5kHz This switch selects the centre frequency of the high band filter section in bell mode, or the frequency of maximum boost/cut in shelf mode.
  • Page 4 relay. To engage the Tonic equalizers, the switch should 4] High Pass Filter Frequency be in the EQ IN position. Adjustment This switch selects the high pass filter (HPF) in Facility is provided on the Tonic set the high pass filter and out of the Tonic signal path.

  • Page 5: Specifications

    17Hz to 175kHz (+1dB, -3dB). To obtain our up to date contact information please visit Harmonic Distortion Measured +10dBu output level our website; www.buzzaudio.com 0.08% @ 100Hz, 0.02% @ 1kHz, 0.005% @ 10kHz •Disclaimer Signal to Noise Ratio -88dB A wtg, input shorted.
  • Page 6 The above Warranty may be extended to a period of 2 years (24 months) from date of sale provided you Register your purchase on-line at our web-site www.buzzaudio.com. The Extended Warranty is transferable to the new owner if you on sell the unit during the warranty period.

This manual is also suitable for:

Tonic

Table of Contents