Download Print this page

Mayer EMI VIBES MD850 Quick Start Manual

Hide thumbs Also See for VIBES MD850:

Download this manual

VIBES

MD850

QUICKSTART

Need help?

Do you have a question about the VIBES MD850 and is the answer not in the manual?

Page 1 VIBES MD850 QUICKSTART...
Page 3 The Vibes MD850 is regularly updated with new features, sound packs and other improvements via firmware updates. Please visit our support page for the newest version of your Vibes MD850 Firmware. Full Owner’s Manual Since the software of your purchased synthesizer can and will be updated, we decided to publish the Owner’s manual digitally, so that it is aligned with the software version...
Page 4 Vibes MD850 to your needs. Connecting DIN MIDI Keyboards The Vibes MD850 has three 5-pin MIDI DIN connectors to allow you to interface with other MIDI devices. MIDI OUT sends data from the Vibes, MIDI IN receives data, and MIDI Thru passes data from the MIDI IN without any modifications.
Page 5 Connecting Schema Connecting USB MIDI Keyboards / Controllers The Vibes MD850 has three USB-A Host jacks to allow you to interface with USB-MIDI Devices. Each port is able to supply a maximum current of 0.5A (1.5A in total) to connected Devices. Each port is equal in its functionality and supports standard USB- MIDI keyboards and a selected range of Launch Pad Controllers without the need of any driver installation.
Page 6 Turn on the Power Switch located on the rear panel of the Vibes MD850. Wait for the Vibes MD850 to start up and show the startup screen in the display. You are ready to create your sounds starting with the automatically loaded Performance.