Download
Share
Print this page
AJA OG-ColorBox Installation And Operation Manual
  1. Manuals
  2. Brands
  3. AJA Manuals
  4. Video Card
  5. OG-ColorBox
  6. Installation and operation manual
AJA OG-ColorBox Installation And Operation Manual

AJA OG-ColorBox Installation And Operation Manual

Opengear card
Hide thumbs

Advertisement

Quick Links

Download this manual
OG-ColorBox
openGear Card
Installation and Operation Guide
Version 1.0
Published October 1, 2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the OG-ColorBox and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AJA OG-ColorBox

Summary of Contents for AJA OG-ColorBox

  • Page 1 OG-ColorBox openGear Card Installation and Operation Guide Version 1.0 Published October 1, 2024...
  • Page 2 AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc. for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for use with recorder, router, software and camera products. Because it matters.™ is a trademark of AJA Video Systems, Inc.
  • Page 3 AJA ........10...
  • Page 4 Appendix A – Specifications ......74 OG-ColorBox Tech Specs........74 Appendix B –...
  • Page 5 Built around a 33-point 3D LUT processor with tetrahedral interpolation, the AJA Color Pipeline provides additional 4x 1D LUTs and 2x 3x3 matrices that are each individually configurable or can be converted to Proc Amps or RGB Color Correctors.
  • Page 6 • 10-bit 4:2:2 HDMI 2.0 output for up to 4K/UltraHD HDR/WCG 60p • Ultra-low latency, less than ½ of a video line • Extensive AJA Color Pipeline built around the 33-point 3D LUT processor with tetrahedral interpolation • 7x nodes plus Overlay •...
  • Page 7 • Five year warranty DashBoard for openGear DashBoard by Ross Video is used with openGear cards and frames. Use DashBoard as part of the configuration process of OG-ColorBox during setup of the system integration. NOTE: See "DashBoard Control System" on page 20.
  • Page 8 SDI Lock LED • Red = 1.5G • Amber = 3G • Purple = 6G • Blue = 12G • Off = no signal (OG-ColorBox is not locked to valid or supported input format) OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 9 NOTE: See "OG-ColorBox Front Card Installation" on page 17. Card Alarm State – Green When there is no card issue detected, the DashBoard Control System shows a green Card State.
  • Page 10 DashBoard operates through TCP/IP communication and requires an Ethernet connection between the controlling computer and an openGear frame. In the case of the OG-ColorBox, a limited set of DashBoard features are utilized, because the OG-ColorBox has its own WebUI interface. NOTE: See "DashBoard Control System"...
  • Page 11 DIP Switches The OG-ColorBox has a DIP Switches module mounted just above the battery on the card. The DIP Switches are used to configure the card for various boot modes. Figure 7. Location of DIP Switches on OG-ColorBox Card Battery DIP Switches Only switches #2 and #3 are used.
  • Page 12 6. Boot normally except with Factory (default) Settings. WARNING: Restore Factory Settings clears all configuration data from the OG-ColorBox, including the entire Library, all Images and Presets, and network settings (DHCP is enabled after reset). Any installed licenses, however, are retained after a Factory reset.
  • Page 13 • Install the rear card onto the back of the openGear frame corresponding to the slot pair you will be using for the OG-ColorBox front card. • Insert the OG-ColorBox front card into the frame in the right (even numbered) slot of the pair.
  • Page 14 3 BNC, 1 HDMI, 1 LAN Rear Card in ESD bag HDMI Cable Bracket OG-ColorBox Rear Card Installation (without HDMI Bracket) If you are connecting a cable to the HDMI output on the OG-ColorBox rear card, continue with the procedure "OG-ColorBox Rear Card Installation (with HDMI Bracket)"...
  • Page 15 (interior) side of the Rear Card. Mount the HDMI Cable Mounting Bracket to Rear Card 1. Locate the OG-ColorBox Rear Card, HDMI Cable Bracket, and the two bracket mounting screws (supplied). 2. Align the two mounting threads on the HDMI Cable Bracket with the two screw holes on either side of the HDMI Connector.
  • Page 16 1. Locate the slot on the rear of the openGear frame into which you wish to install the openGear card. NOTE: An OG-ColorBox card occupies two slots in the frame. 2. Using a Phillips screwdriver, unscrew the top screw from the desired slot's blank plate.
  • Page 17 The slots are numbered starting from the left-most slot when facing the frame front. IMPORTANT: OG-ColorBox cards are installed into the right (even numbered) slot of the pair in order to connect with the rear card. 4. Fully insert the card into the frame until the card is properly seated in the rear card.
  • Page 18 Figure 16. Fully Inserted Card with Locked Plastic Tab 5. Close the frame door as follows: A. Slide the door into the frame. B. Pull and release the door tabs to ensure the frame door is securely locked to the frame. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 19 • There is a dedicated LAN port located on all openGear frames, using a unique IP address for communication with the DashBoard Control System. • The OG-ColorBox LAN Port located on its rear card, has its own IP configuration to communicate with the OG-ColorBox WebUI.
  • Page 20 1. Download and Install the Ross DashBoard application on a host computer. 2. Connect OG-ColorBox's LAN port to a network that is accessible by your computer. 3. Power up the openGear frame that OG-ColorBox is installed in.
  • Page 21 Configuration Settings Stored in OG Card Configuration settings made through DashBoard are stored in the OG-ColorBox card through subsequent power cycles. DashBoard Control Interface Basic Components The basic components of the DashBoard Control System user interface consist of the Basic Tree View of frames and cards, the Card Information and Status panel, and the Parameter Controls panel.
  • Page 22 "Indicators in the DashBoard Control System" on page 9. Card Setup Screen The OG-ColorBox Card Setup tab selected in the DashBoard Card Infor and Status tab (fig. 20) in the left-side (Slot) Tab, showing the Card Setup (default Tab) on the right-side.
  • Page 23 Identify Card - Select the checkbox to turn on the Identify Card function. When this function is turned on, an LED light on the front of the OG-ColorBox card inside the openGear frame will blink to help you quickly identify the card.
  • Page 24 • DHCP (default) - Selects automatic IP address assignment from the LAN DHCP server. If a DHCP server cannot be found, OG-ColorBox will fall back to the previously entered Static IP address. If no Static IP address had been entered, the system fails over to a link local static IP address (169.254.x.x).
  • Page 25 However, you will need to know that IP address before you will be able to access OG-ColorBox’s internal web server for configuration. B. If your OG-ColorBox is not connected to a network, or your network does not use DHCP, you will need to configure it with a static IP address.
  • Page 26 5. For the license to be fully enabled, power cycle the OG-ColorBox. NOTE: Do not change the License Key filename. OG-ColorBox will reject the License Key if the filename is changed. The filename format is: AJA_COLORBOX-LIC-ACT_PERP_ XXXXXXXXX where XXXXXXXXX is the serial number of the OG-ColorBox.
  • Page 27 OG-ColorBox Safeboot is initiated by DIP switch settings. See "Putting OG-ColorBox into Safeboot" on page 12. With the safeboot software running, you will be able to update your OG-ColorBox to the latest firmware version using its WebUI. OG-ColorBox openGear Card Manual v1.0...
  • Page 28 When using the AJA Color Pipeline (ACP), stored Presets retain all files loaded into the nodes, either active or not. When loading an ACP Preset, all files that were stored in that Preset will populate the OG-ColorBox Library if not already present.
  • Page 29 A warning will be displayed if not enough library locations are available. If Dynamic LUTs are being used in the AJA Color Pipeline, storing a Preset saves the latest Dynamic LUTs or 3x3 matrices values provided from the external color management system for that node.
  • Page 30 Pipeline Node Pipeline Node All OG-ColorBox web screens have certain areas and controls in common. Vertical and horizontal scroll bars appear when information extends past the border of a screen panel. The round blue Up/Down or Left/Right arrow button on each pane opens and closes that pane.
  • Page 31 LUTs, 3D LUTs, 3x3 Matrix, Image files, Overlay, and AMF files. The LUTs and 3x3 Matrix files are available for use only in the AJA Color Pipeline Mode. AMF files are available for use only in the ACES Pipeline Mode. Image and Overlay files however, are available for use in all Pipeline modes.
  • Page 32 NOTE: Information displayed in the Library pane can also be presented in the Configure pane. Deleting a file from either pane deletes the file from that OG-ColorBox (see "Configure Pane" on page 36).
  • Page 33 • DHCP (default) - Selects automatic IP address assignment from the LAN DHCP server. If a DHCP server cannot be found, OG-ColorBox will fall back to the previously entered Static IP address. If no Static IP address had been entered, the system fails over to a link local static IP address (169.254.x.x).
  • Page 34 OG-ColorBox specifies machines by name the names won’t work, although numeric IP addresses will still work. CAUTION: When using Static IP addressing for OG-ColorBox, be sure to also enter a valid DNS server address in the "Primary DNS Server" field. If the DNS Server address is not entered or is invalid, URLs in streaming destinations won’t work...
  • Page 35 Click the Change button to enter a custom name for this OG-ColorBox, which can be useful if more than one OG-ColorBox is being used in a production. This name appears in the Network tab of AJA devices connected on that network.
  • Page 36 OG-ColorBox overheats an Overtemp Alarm will be displayed. Clicking on the arrow opens or closes this pane to show or hide the alarms. Network Pane At-a-glance you can see the AJA devices that are present on the same local LAN using the Network pane ("OG-ColorBox WebUI Example" on page 30).
  • Page 37 This cannot be accomplished in the Library pane. NOTE: Information displayed in the Configure pane can also be presented in the Library pane. Deleting a file from either pane deletes the file from that OG-ColorBox (see "Library Pane" on page 31).
  • Page 38 User Management Pane Figure 34. User Management Pane Example Access to the OG-ColorBox over the network can be managed by configuring an Administration Login for that device. The default User Name and Password are both "admin". When Authentication is Enabled, you will need to perform a login each time you access the OG-ColorBox via its WebUI.
  • Page 39 Clicking on a pipeline tab selects that pipeline and makes it active. Any color or other processing configured in that pipeline will immediately be applied to the OG-ColorBox's outputs, and any color processing configured in other pipeline modes will be disabled. Different pipelines will have different signal flow diagrams.
  • Page 40 Video Preview image, if shown, which always displays the signal selected with the INPUT and OUTPUT buttons, described above. Input and Output Icon selections apply to all OG-ColorBox pipelines. Overlay (All Pipelines) Figure 36. Configure Pane Overlay Settings...
  • Page 41 Click on this check box to toggle the Overlay image on and off in the Overlay node. The overlay image, and any selected overlay text, will then be routed to the OG-ColorBox's output when the Overlay node is turned on. OG-ColorBox openGear Card Manual v1.0...
  • Page 42 4K (4096x2160) resolution, as well adjust the Test Pattern generator and other controls. The Frame Store is shared with all OG-ColorBox pipeline modes. Any Frame Store adjustment made in one mode will affect Frame Store behavior in every other OG-ColorBox pipeline mode.
  • Page 43 NOTE: Whenever the Frame Store is On, Overlay becomes unavailable and is removed from the OG-ColorBox pipeline signal flow diagram. Bypass (All Pipelines) Clicking on the Bypass on/off toggle switches OG-ColorBox into a hardware bypass mode, where all color processing is bypassed. The Pipeline signal flow line will show Bypass is active.
  • Page 44 AJA Color Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available in all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes. These settings are also saved to Presets. The AJA Color Pipeline has seven color processing nodes, along with the Overlay, Frame Store and Bypass features.
  • Page 45 • Color Corrector • SMPTE Narrow to SMPTE FULL • SMPTE FULL to SMPTE Narrow • ARRI WVO to LogC4 Decoder (see "ARRI WVO to LogC4 Decoder in the AJA Color Pipeline" on page 73). OG-ColorBox openGear Card Manual v1.0...
  • Page 46 • SMPTE FULL to SMPTE Narrow Proc Amp In the AJA Color Pipeline, 3x3 Matrices can be set up as Proc Amps for adjusting a signal’s Gain, Black level, Hue, and Saturation before 3D LUT processing. This is a common workflow in live production applications.
  • Page 47 Look Management system, providing real-time modification of LUT information. Dynamic LUT operation allows a third party application to transfer LUTs to the OG-ColorBox over Ethernet without user intervention. As changes are made to the LUT in the third party application, the new LUT is instantly loaded into the OG-ColorBox’s node.
  • Page 48 Colorfront Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available on all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes. These settings are also saved to Presets. Colorfront Overview The OG-ColorBox HDR/WCG capabilities leverage video and color space processing algorithms within the Colorfront Engine, developed by Colorfront’s...
  • Page 49 Figure 45. Watermarked Content in Unlicensed Mode Colorfront TV Mode OG-ColorBox's Colorfront TV Mode provides operators access to new Brightness, Highlight, Super Highlight, and Colorfulness tools that enable greater control over critical elements in color conversions. With this expanded toolset, get controlled corrections within the guardrails of Colorfront’s perceptual processing algorithm,...
  • Page 50 • Range -1.00 to +1.00 (default 0) Color Corrector Colorfront Engine TV Mode incorporates its own color corrector, separate from the OG-ColorBox's Color Corrector available in other modes. The parameters available when this Color Corrector is on include: Master Lift...
  • Page 51 • Select On or Off (default). Colorfront Live Mode OG-ColorBox's Colorfront Live mode is designed primarily for broadcast style workflows, supporting a variety of color space formats, including camera log. When Live Mode is selected, the following parameters are available: OG-ColorBox openGear Card Manual v1.0...
  • Page 52 SDR, allowing quick A/B comparison on an HDR display in HDR mode. NOTE: The SDR Preview parameter only applies when the OG-ColorBox's Dyn Range&Gamut OUT parameter is set to HDR (PQ or HLG). OG-ColorBox openGear Card Manual v1.0...
  • Page 53 (television), with dramatic being 0.0 and broadcast 1.0. • Range +1.00/0.00, Default 0.500 NOTE: This parameter only applies if the OG-ColorBox's input is a camera log format. SDR Softness If the Input Dynamic Range and Gamut is set to SDR BT.709 100 Nits, this control adjusts how the SDR brights/highlights are mapped into brights and speculars of the 1000 nit HDR output range.
  • Page 54 • Range +2.00/0.00, Default 1.00 Exposure Scene referred linear light adjustment to compensate for scene lighting intensity. The Exposure control is the equivalent of adjusting the photons landing on the camera sensor. • Range +4.00/-4.00, Default 0.00 OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 55 With the same simple set of controls for highlight and contrast in both products, colorists can grade in SDR and preview in real-time what the Dolby Vision HDR will look like using OG-ColorBox prior to Transkoder encoding it with the proper Dolby Vision metadata. This enables fast creation of Dolby Vision HDR graded content that guarantees a precise roundtrip match between the original and derived SDR content.
  • Page 56 Resets Colorfront SDR to Dolby Vision Preview parameters to default states. ORION-CONVERT Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available on all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes. These settings are also saved to Presets.
  • Page 57 HDR only and a post-conversion compression in SDR only providing very effective roll off management control. NOTE: Watermarks are added to the OG-ColorBox's video output when an unlicensed pipeline is being used. This lets you test the color science in advance of purchase.
  • Page 58 We would use these conversions when the appearance of the content, as seen by a camera, is the intended process. For example, when using the SDR output OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 59 When compressing, a value of zero applies no compression (at which point the value of Knee is irrelevant) and a value of 1 will compress completely, flattening everything above the value of Knee to that value. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 60 4. Once you’ve found the desired result, simply invert the direction of the conversion on the drop-down menu and you will get an absolute mathematical invert to ensure a clean round trip. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 61 BBC HLG LUTs Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available on all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes. These settings are also saved to Presets. The BBC HLG LUTs Pipeline offers licensed 3D LUTs that add field proven HDR conversion options, particularly for television broadcasters who are looking for specific conversion criteria.
  • Page 62 BT.2100 HLG at the BT.2408 signal levels using a display-light conversion. The “look” of the original BT.2020 content is therefore preserved on conversion. A 100% SDR signal is mapped to 75% HLG (“HDR Reference White”). OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 63 RGB signal range. For that reason, in addition to the “ideal” output values for the EBU Tech 3373 HLG Color Bars, we also provide the expected output values from a trilinear interpolator. Errors should be smaller with tetrahedral interpolation, the 65-cubed LUTs and also with real pictures. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 64 BT.2111 color bars displayed on a current reference display as their color- primaries tend to be closer to DCI-P3 than BT.2100. Most noticeable might be the BT.2100 green, which is much more cyan in color than the DCI-P3 and BT.709 greens. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 65 Combination LUT for shading SDR BT.709 cameras in live “single stream” HDR Display production. Combines LUT4-1 (scene-light BT.709 to HLG) and LUT9 (display-light HLG to BT.709) into single conversion, thereby allowing camera shaders to directly view the SDR signal seen by audiences. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 66 NBCU LUTs Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available on all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes. These settings are also saved to Presets. NBCU LUTs, developed by NBCUniversal Media, LLC in collaboration with Cromorama, enable a workflow for single-master live production of simultaneous HDR and SDR content.
  • Page 67 NOTE: NBCU LUT numbering goes from #5 to #7. LUT #6 is skipped intentionally. ACES Pipeline NOTE: The Frame Store, Bypass, and Overlay controls are available in all OG-ColorBox pipeline modes, and their settings are applied to all the other pipeline modes.
  • Page 68 NOTE: AJA's ACES Pipeline is built on OpenColorIO (OCIO) that has a new implementation of AMF. AMFs can be created by various tools and not all AMF's are supported by the ACES Pipeline.
  • Page 69 To enable ARRI WVO to LogC4 decoding in the ACES Pipeline, enable the ARRI WVO to LogC4 Decoder on Input control in the Configure pane on the right (see "ARRI WVO to LogC4 Decoder in the ACES Pipeline" on page 73). OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 70 ACES Input and Output Transform Nodes OG-ColorBox supports user overrides of input and/or output transforms for ACES AMF pipelines. See "Input and Output Transforms" on page 70. Typical use cases include: • An AMF file is generated with a specific camera Log input but the onsite camera is of a different format.
  • Page 71 Rec.2100-PQ - Display/ACES 1.1 - HDR Video (4000 nits & Rec.2020 lim) SDI/HDMI Output Configurations 4K/UltraHD Down-Conversion of SDI/HDMI Outputs OG-ColorBox supports independent down-conversion of SDI and HDMI outputs. This allows users to down convert 4K video to 2K video or UltraHD video to HD video.
  • Page 72 (Default) Performs crop based on EDID and connected display's capabilities. NOTE: When set to Auto, if the input is 2K, OG-ColorBox will automatically crop to HD (1920x1080). If the input is 4K, OG-ColorBox will use the EDID to determine if the display supports 4K if it doesn't, OG-ColorBox will crop to (3840x2160).
  • Page 73 LUT must be used after signal reception to reconstitute regular LogC4. The matching ARRI WVO decoding LUT is built into the 1D LUT options in the AJA Color Pipeline and is an option in the Colorfront Pipeline Live Mode, and ACES Pipeline.
  • Page 74 • Processes in 12-bit RGB • 6x pipelines; AJA Color, Colorfront, ORION-CONVERT, BBC HLG LUTs, NBCU LUTs, ACES • 7x processing nodes plus Overlay in AJA Color; 4x 1D LUTs, 2x 3x3 Matrices, 1x 3D LUT AJA Color Pipeline (ACP) •...
  • Page 75 • Highlight management: Brightness, Highlight, Super Highlight • Colorfulness control for managing the Hunt Effect • Color Correction: Lift, Gamma, Gain, Saturation • Camera Correction: Exposure, Color Temp, Tint • Roundtrip control ensures technical match • Clamp to Legal OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 76 • S-Log3/BT.2020 100% Scene Referred to HLG/BT.2100 v1.7 • S-Log3/BT.2020 200% Scene Referred(SR-Live) to HLG/BT.2100 v1.7 • HLG/BT.2100 to SDR/BT.709 Scene Referred v1.7 • HLG/BT.2100 to SDR/BT.709 Scene Referred Strict v1.7 • HLG/BT.2100 to SDR/BT.709 Display Referred Color Appearance Model v1.7 OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 77 • (2K) 2048x1080PsF 23.98, 24, 25 • (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 • (HD) 1920x1080PsF 23.98, 24, 25, 29.97, 30 • (HD) 1920x1080i 50, 59.94, 60 • (HD) 1280x720p 50, 59.94, 60 OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 78 • (HD) 1920x1080PsF 23.98, 24, 25, 29.97, 30 • (HD) 1920x1080i 50, 59.94, 60 • (HD) 1280x720p 50, 59.94, 60 Note: Raster and Frame Rate Dependent, please see OG-ColorBox Video Formats in Documents Video Output HDMI • 1x HDMI Type A connector*, HDMI v2.0b •...
  • Page 79 • openGear DashBoard network control software via Windows, macOS, or Linux. • Web User Interface • DIP Switches Presets • 10 Pipeline Presets per mode (AJA Color, Colorfront, ORION-CONVERT, BBC HLG LUTs, NBCU LUTs, ACES)) • Startup Preset Size (w x d x h) •...
  • Page 80 AUSTRIA, BELGIUM, BULGARIA, CROATIA, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, ICELAND, IRELAND, ITALY, LATVIA, LIECHTENSTEIN, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, NORWAY, POLAND, PORTUGAL, REPUBLIC OF CYPRUS, ROMANIA, SLOVAK REPUBLIC, SLOVENIA, SPAIN, SWEDEN, SWITZERLAND, UNITED KINGDOM OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 81 For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 82 If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions. Translated Warning and Caution Messages The following caution statements, warning conventions, and warning messages apply to this product and manual. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 83 (incluindo amplificadores) que produzam calor. Avviso! Non installare vicino a fonti di calore come termosifoni, diffusori di aria calda, stufe o altri apparecchi (amplificatori compresi) che emettono calore. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 84 Aviso! Dado que a ficha principal é utilizada como a desconexão para o dispositivo, esta deve manter-se prontamente acessível e funcional. Avviso! Poiché il cavo di alimentazione viene usato come dispositivo di sconnessione, deve rimane prontamente accessibile e operabile. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 85 Aviso! Desconecte este dispositivo da tomada durante trovoadas ou quando não é utilizado durante longos períodos de tempo. Avviso! Utilizzare soltanto i collegamenti e gli accessori specificati e/o venduti dal produttore, quali il treppiedi e l'esoscheletro. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 86 Advertência! Não abra o chassi. Não há internamente nenhuma peça que permita manutenção pelo usuário. Abrir o chassi anula a garantia, a menos que a abertura seja realizada por uma central de serviços da AJA ou por um local autorizado. Avvertenza! Non aprire lo chassis. All’interno non ci sono parti riparabili dall’utente.
  • Page 87 ¡Advertencia! Utilice solamente los accesorios y conexiones especificados y/o vendidos por el fabricante. Aviso! Utilize apenas equipamentos/acessórios especificados e/ou vendidos pelo fabricante. Avviso! Utilizzare soltanto i collegamenti e gli accessori specificati e/o venduti dal produttore. OG-ColorBox openGear Card Manual v1.0 www.aja.com...
  • Page 88 AJA Video shall pay to return the product to Customer, but only if to a location within the country in which the AJA Video service center is located. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO SOME OR ALL OF THE TERMS OF THIS PARAGRAPH MAY NOT APPLY TO YOU.
  • Page 89 1. License Grant. AJA hereby grants you a nonexclusive, personal, non-sublicenseable and limited license to install and use AJA Software on a computer or AJA device. The foregoing license also includes the right to make copies of the AJA Software in...
  • Page 90 REGARDING NON-INFRINGEMENT OF THIRD PARTY RIGHTS.  SUBJECT ONLY TO THE LIMITED WARRANTY SET FORTH IN SECTION 7, YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE AJA SOFTWARE IS AT YOUR SOLE RISK. AJA DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE AJA SOFTWARE,...
  • Page 91 No amendment to or modification of this Agreement will be binding unless in writing and signed by AJA. Any translation of this Agreement is intended for convenience and to meet local requirements and in the event of a dispute between the English and any non-English versions, the English version of this Agreement will govern.
  • Page 92 Contacting AJA Technical Support 2 Cabling 19 Post-Expansion 59 Control Tab Rear Card Installation 14, 15 Pre-Compression 58 Use with AJA Color Pipeline 44 Install Rear Card into openGear Pre-Expansion 58 Conversion Direction Frame 16 Round Trip Conversion 60 ORION-CONVERT 58...
  • Page 93 STATUS LED 8 Perform Factory Reset 12 System Settings Pane 32 Pipeline System Settings Screen Control Tab AJA Color 44 Use with AJA Color Pipeline 44 BBC HLG LUTs 61 System Tab 35 Bypass 43 Colorfront 48 Description 39 Test Pattern 42...