Dell E2725H User Manual

Hide thumbs Also See for E2725H:

Instructions manual (20 pages)

page of 51

/ 51
Bookmarks

Quick Links

Download this manual

Dell E2725H/SE2725H Monitor

User's Guide

Model: E2725H/SE2725H

Regulatory Model: E2725Hc/SE2725Hc

August 2024

Rev. A00

Need help?

Do you have a question about the E2725H and is the answer not in the manual?

Questions and answers

Summary of Contents for Dell E2725H

Page 1 Dell E2725H/SE2725H Monitor User’s Guide Model: E2725H/SE2725H Regulatory Model: E2725Hc/SE2725Hc August 2024 Rev. A00...
Page 2 A WARNING indicates a potential for property damage, personal injury, or death. © 2024 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Page 3 *Dell Display Manager ........
Page 4 Contacting Dell ........
Page 5 Safety instructions Use the following safety guidelines to protect your monitor from potential damage and to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that you have read the safety information that shipped with your monitor. NOTE: Before using the monitor, read the safety information that is shipped with your monitor and printed on the product.
Page 6 About your monitor Package contents The following table provides the list of components that are shipped with your monitor. If any component is missing, contact Dell. For more Contacting Dell information, see NOTE: Some items may be optional and may not ship with your monitor. Some features may not be available in certain countries.
Page 7 This monitor is certified with TÜV Rheinland Eye Comfort 3.0 with a 3-star rating. It incorporates key technologies that also deliver a flicker-free screen, up to 75 Hz refresh rate, and a color gamut of NTSC Min. 72% (CIE 1931) or sRGB Min 95% (CIE 1931). Dell ComfortView Plus feature is enabled by default on your monitor.
Page 8 About TÜV Rheinland Eye Comfort 3.0 TÜV Rheinland Eye Comfort 3.0 certification program presents a consumer-friendly star rating scheme to the display industry thereby promoting eye wellness from safety to eye care. Compared to existing certifications, the 5-star-rating program adds rigorous testing requirements on overall eye care attributes such as low blue-light, flicker-free, refresh rate, color gamut, color accuracy, and ambient light sensor performance.
Page 9 *The operating system compatibility on Dell and Alienware branded monitors may vary based on factors such as: • Specific release date when operating system versions, patches, or updates are available. • Specific release date when Dell and Alienware branded monitor firmware, software application, or driver updates are available on the Dell support website. About your monitor...
Page 10 Identifying parts and controls Front view Figure 1. Front view of the monitor Table 4. Components and descriptions. Label Description Function buttons To access the on-screen display (OSD) menu. (For more information, see Using the control buttons Power button (LED indicator) To turn the monitor on or off.
Page 11 Regulatory information label Lists the regulatory approvals. Regulatory labels (including Barcode, serial Lists the regulatory approvals. See this label if you must contact Dell for number and Service Tag label) technical support. The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware components in your computer and access warranty information.
Page 12 Left or Right 12.71 mm 12.71 mm Bottom 15.67 mm 16.11 mm Adjustability Tilt /+21 ° ° /+21 ° ° Dell display manager compatibility Security Security-lock slot (cable lock optional purchase) Security-lock slot (cable lock optional purchase) About your monitor...
Page 13 *Dell Display Manager Dell Display Manager is an application software that enhances the experience of your Dell monitor- ensuring more productivity and ease in customization. With this application you can: Adjust the monitor On-Screen Display (OSD) settings such as brightness, contrast, input source setting, and so on, with ease. Use the DDM software instead of the joystick on the monitor to switch between options.
Page 14 79.98 75.02 135.00 VESA, 1600 x 900 60.00 60.00 108.00 VESA, 1920 x 1080 67.50 60.00 148.50 VESA, 1920 x 1080 83.89 74.97 174.50 (E2725H DP/SE2725H HDMI) VESA, 1280x720 44.77 59.86 74.50 VESA, 1280x720 56.46 74.78 95.75 About your monitor...
Page 15 Electrical specifications Table 12. Electrical specifications E2725H SE2725H Description Value Value Video input signals Analog RGB, 0.7 V ± 5%, 75 Ω input impedance Analog RGB, 0.7 V ± 5%, 75 Ω input impedance DisplayPort 1.2, 600 mV for each differential line, HDMI 1.4, 600 mV for each differential line,...
Page 16 Dell monitors are designed to work optimally with the video cables that are shipped with your monitor. Dell cannot guarantee the video performance of cables that are not included with your Dell monitor, as it has no control over suppliers, materials, connectors, and manufacturing processes.
Page 17 Environmental characteristics Table 14. Environmental characteristics E2725H SE2725H Description Value Value • • Compliant Standards ENERGY STAR certified monitor ENERGY STAR certified monitor • • EPEAT registered where applicable. EPEAT RoHS-compliant registration varies by Country. See • BFR/PVC reduce monitor (The circuit www.epeat.net...
Page 18 Pin assignments D-Sub 15-pin connector Figure 6. D-Sub 15-pin connector Table 15. D-Sub 15-pin connector Pin number Monitor side of the 15-pin side signal cable Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B DDC +5 V GND-sync DDC data H-sync V-sync DDC clock About your monitor...
Page 19 DP 20-pin connector Figure 7. DP 20-pin connector Table 16. DP 20-pin connector Pin number 20-pin side of the connected signal cable ML3 (n) ML3 (p) ML2 (n) ML2 (p) ML1 (n) ML1 (p) ML0 (n) ML0 (p) AUX (p) AUX (n) Hot Plug Detect Re-PWR...
Page 20 HDMI 19-pin connector Figure 8. HDMI 19-pin connector Table 17. HDMI 19-pin connector Pin number 19-pin side of the connected signal cable TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0-...
Page 21 During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state, which are hard to see and do not affect the display quality or usability. For more information about Dell Monitor Quality and Pixel Policy, see www.dell.com/pixelguidelines.
Page 22 Ergonomics CAUTION: Improper or prolonged usage of a keyboard may result in injury. CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain. For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation: •...
Page 23 Handling and moving your display To ensure that the monitor is handled safely when lifting or moving it, observe the following guidelines: • Before moving or lifting the monitor, turn off your computer and the monitor. • Disconnect all cables from the monitor. •...
Page 24 For best practices, follow the instructions in the list below when unpacking, cleaning, or handling your monitor: • Use a clean cloth that is slightly dampened with water to clean the stand assembly, the screen, and the chassis of your Dell monitor. If available, use a screen-cleaning tissue or solution suitable for cleaning Dell monitors.
Page 25 Place the monitor stand base on a stable table top. Slide the monitor stand body in the correct direction down onto the stand base. Tighten thumbscrew clockwise till it is securely fastened (E2725H). Figure 13. Assemble the stand riser to stand base...
Page 26 2. Slide the tabs on the stand assembly into the slots on the monitor and press the stand assembly down to snap it into place. Figure 14. Attach the stand assembly to the monitor Open the monitor protective cover, install the VESA screw cover. Figure 15.
Page 27 Place the monitor in an upright position. a: E2725H b: SE2725H Figure 16. Place the monitor in an upright position Setting up the monitor...
Page 28 Dell monitors are designed to work optimally with the video cables that are shipped with your monitor. Dell cannot guarantee the video performance of cables that are not included with your Dell monitor, as it has no control over suppliers, materials, connectors, and manufacturing processes.
Page 29 Organizing cables Use cable management clip on stand assembly to route the cables that are connected to your monitor. Figure 20. Organizing cables 4. Turn on the Monitor. Figure 21. Turn on the Monitor Setting up the monitor...
Page 30 Securing your monitor using Kensington lock (optional) Security-lock slot The security lock slot is at the bottom of the monitor. (see .) Secure your monitor to a table using the Kensington security lock. For more information about using the Kensington lock (sold separately), see the documentation that is shipped with the lock. Figure 22.
Page 31 NOTE: For use only with UL or CSA or GS-listed wall mount brackets with minimum weight or load bearing capacity of 15.04 kg (E2725H)/14.96 kg (SE2725H). NOTE: When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling.
Page 32 Using tilt You can tilt the monitor for the most comfortable viewing angle. NOTE: These values are applicable to the stand that was shipped with your monitor. To set up with any other stand, see the documentation that shipped with the stand. Figure 28.
Page 33 Operating your monitor Turning on the monitor Press the button to turn on the monitor. Figure 29. Turn on the monitor Using the control buttons Use the control buttons at the bottom edge of the monitor to adjust the image being displayed. Figure 30.
Page 34 OSD controls Use the buttons on the bottom edge of the monitor to adjust the image settings. Figure 31. Control buttons Table 19. Control Buttons and descriptions. Label Control Buttons Description Use the Up button to increase values or move up in a menu. Use the Down button to decrease values or move down in a menu.
Page 35 Using the On-Screen Display (OSD) menu Accessing the OSD menu NOTE: Any changes that you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to close automatically. Press the button to display the OSD main menu.
Page 36 Table 20. OSD menu Icon Menu and Submenus Description Brightness/Contrast Use this option to control the brightness or contrast settings. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and press the button to decrease the brightness (minimum 0/maximum 100).
Page 37 Use the input source menu to select between the different video signals that may be connected to your monitor. Push to select the VGA input source when using VGA connector. DP (E2725H) Push to select the DP input source when using DP connector. HDMI (SE2725H) Push to select the HDMI input source when using HDMI connector.
Page 38 Icon Menu and Submenus Description Color Use color to adjust the color setting mode. Preset Modes When you select Preset Modes, you can choose Standard, Warm, Cool, or Custom Color from the list. • Standard: Loads the default settings of your monitor. This is the default preset mode. •...
Page 39 Icon Menu and Submenus Description Display Use the display to adjust image. Aspect Ratio Adjusts the image ratio to 16:9, 4:3, and 5:4. Horizontal Position to move image left and right. (VGA input only) Minimum is '0' (-). Maximum is '100' (+). Vertical Position to move image up and down.
Page 40 Icon Menu and Submenus Description Lock Controls user access to adjustments. The buttons are locked. • Menu Buttons: Through OSD to lock the Menu buttons. • Power Button: Through OSD to lock the Power button. • Menu + Power Buttons: Through OSD to lock both the Menu and Power buttons. •...
Page 41 Reset all settings under the Others setting menu to the factory default. Factory Reset Reset all settings to the factory default. These are also the settings for ENERGY STAR tests. More Information Select this option for display information and Dell monitor support. Operating your monitor...
Page 42 Using the OSD lock function You can lock the front-panel control buttons to prevent access to the OSD menu and/or power button. Use the Lock menu to lock the buttons. Select one of the following options. 2. The following message appears. 3.
Page 43 Press and hold button 4 for four seconds, a menu appears on the screen. 2. Select one of the following options: Table 21. Buttons lock and descriptions. Control Buttons Description Select this option to lock the OSD menu function. Menu Buttons lock Use this option to lock the power button.
Page 44 OSD warning messages Before the DDC/CI function is disabled, the following message is displayed. When the monitor enters Standby Mode, the following message appears. Operating your monitor...
Page 45 If no VGA or DP (E2725H) or HDMI (SE2725H) cable is connected, a floating dialog box as shown below appears. The monitor will enter Standby Mode after 4 minutes if left in this state. Operating your monitor...
Page 46 If you have a Dell desktop or portable laptop: • Go to https://www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. If you are using a non-Dell computer (laptop or desktop): •...
Page 47 Troubleshooting Safety instructions WARNING: Before you begin any of the procedures in this section, follow the Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: Turn off both your computer and the monitor.
Page 48 Onboard diagnostics Your monitor has a onboard diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the onboard diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the onboard diagnostics: Ensure that the screen is clean (no dust particles on the surface of the screen).
Page 49 Missing pixels Cycle power On-Off. A pixel that is permanently Off is a natural defect that can occur in LCD technology. For more information about Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/pixelguidelines. Stuck-on pixels Cycle power On-Off.
Page 50 Common Symptoms Possible Solutions Intermittent problems Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. Reset the monitor to factory settings (Factory Reset). Perform a monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
Page 51 Regulatory information FCC notices (U.S. Only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website at www.dell.com/regulatory_compliance. EU product database for energy label and product information sheet E2725H: https://eprel.ec.europa.eu/qr/1950745 SE2725H: https://eprel.ec.europa.eu/qr/1993867 Contacting Dell To contact Dell for sales, technical support, or customer service issues, see www.dell.com/contactdell.

This manual is also suitable for:

Se2725h