Mox Mode Using Xdm - Tech Source RAPTOR DL-LITE - X11R6.1 FOR AIX INSTALLATION-REFERENCE Installation And Reference Manual

Raptor DL-Lite X11R6.1 for AIX Installation Manual
directory $X11R6HOME/lib/X11/xdm.
xdm-config contains references to the other files and is used to
specify other configuration parameters of xdm. The Xservers file
specifies the users (displays) that must get a login window.
The Xservers file will have individual lines to represent the X-
server startup on each of the display device on which an xdm login
screen is desired. Each startup line in Xservers file should be
modified to look like the following to enable the Raptor device
based xdm login screen:
:0 Local local-uid@console root \
/usr/X11R6.1/bin/Xtsi :0 –P11 rapdlt0
You may also add any other command line arguments to the end of
the line. For more information on xdm refer to the xdm man pages.

4.5.1 MOX Mode Using xdm

In order to enable MOX under xdm you must make use of the
script installed in
StartWin
Xservers file should be modified as follows:
:0 local /usr/X11R6.1/bin/StartWin:0
Additional command line options can be appended at the end of
this line. The following example StartWin script will start up the
X Server in mox24 mode.
#!/bin/sh
STARSMODE=+mox24
export STARSMODE
pass="/usr/X11R6.1/bin/Xtsi"$*
exec $pass
NOTE: By default, the StartWin script starts up the X Server in
mox24 mode. It can be edited in order to support other MOX
modes.
The configuration file
/usr/X11R6.1/etc.
4-6
The