Advertisement
Quick Links
SWISH BASSWOOD VENETIAN BLIND
The parts may vary from those shown below, should anything be missing or you would like to talk to our
Customer Care Department, please call 0330 005 2233 where our team of experts will be ready to help.
13, 14
Pack Contents
1 x Blind
1 x Fittings Pack
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@sunflex.co.uk
SWISH
General tolerances
General tolerances
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
Unless otherwise specified
Here at Swish, we take safety very seriously. Please read the following information and ensure you retain
0.1 to 5.9mm
+/- 0.1mm
0.1 to 5.9mm
+/- 0.1mm
Material / Finish
6 to 39.9mm
+/- 0.25mm
6 to 39.9mm
+/- 0.25mm
N/A / N/A
40 to 120mm
+/- 0.5mm
40 to 120mm
+/- 0.5mm
these instructions for future reference.
>120mm
+/- 1mm
>120mm
+/- 1mm
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Angular
+/- 5°
Angular
+/- 5°
DO NOT over reach. Always move the step ladder so that you are in a safe working position.
Take care when using power tools, use of a Residual Current Device (RCD) is recommended.
Always use eye protection when drilling. Beware of hidden pipe runs and cables.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled product.
PLEASE KEEP OUT OF THE REACH OF YOUNG CHILDREN. SMALL PARTS - CHOKING HAZARD.
PLEASE KEEP THESE INSTRUCTIONS AND THE BATCH CODE ON THE PACKAGING FOR FUTURE
Fitting Instructions
Please keep for future reference
16, 18
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
1 x Valance (not cut to
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
size) with Fixings
2 x Cleats
SWISH
General tolerances
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
0.1 to 5.9mm
+/- 0.1mm
Material / Finish
6 to 39.9mm
+/- 0.25mm
40 to 120mm
+/- 0.5mm
N/A / N/A
>120mm
+/- 1mm
Angular
+/- 5°
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@sunflex.co.uk
SWISH
RESERVED FOR PART CODE
HOLD DOWN BRACKET VISUAL
Material / Finish
N/A / N/A
Drawn by RB 07/03/2019 //
Safety Recommendation
Always use a step ladder when working at height.
DO NOT hold or lean on the blind to support your weight.
We recommend you use two people for installation of a larger blind.
REFERENCE IN CASE OF ANY QUERIES.
Tools required
17
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
2 x Hold Down Brackets
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK!
Intermediate Support(s)
RESERVED FOR PART CODE
Project ref - Revision
031231 - A
Status / Comment
CONCEPT
(number dependant on blind
Original Issue
Drawn by RB 07/03/2019 //
.
A3 SHEET 1 OF 1
width)
General tolerances
SWISH
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
0.1 to 5.9mm
+/- 0.1mm
6 to 39.9mm
+/- 0.25mm
Material / Finish
N/A / N/A
40 to 120mm
+/- 0.5mm
>120mm
+/- 1mm
Angular
+/- 5°
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@sunflex.co.uk
RESERVED FOR PART CODE
Project ref - Revision
Project ref - Revision
031231 - A
031231 - A
Status / Comment
Status / Comment
CONCEPT
CONCEPT
Original Issue
Original Issue
Drawn by RB 07/03/2019 //
.
.
A3 SHEET 1 OF 1
A3 SHEET 1 OF 1
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@sunflex.co.uk
Optional
25mm
RESERVED FOR PART CODE
Project ref - Revision
031231 - A
Status / Comment
CONCEPT
Original Issue
Drawn by RB 07/03/2019 //
.
General tolerances
A3 SHEET 1 OF 1
Unless otherwise specified
0.1 to 5.9mm
6 to 39.9mm
40 to 120mm
>120mm
+44 (0)1543 271421
Angular
General tolerances
Keys Park Road, Cannock WS12 2FR
SWISH
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@sunflex.co.uk
0.1 to 5.9mm
+/- 0.1mm
6 to 39.9mm
+/- 0.25mm
Material / Finish
N/A / N/A
40 to 120mm
+/- 0.5mm
>120mm
+/- 1mm
Angular
+/- 5°
General tolerances
Unless otherwise specified
0.1 to 5.9mm
+/- 0.1mm
6 to 39.9mm
+/- 0.25mm
40 to 120mm
+/- 0.5mm
>120mm
+/- 1mm
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Angular
+/- 5°
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // Any enquiries please email designandtechnical@
+44 (0)1543 271421
Keys Park Road, Cannock WS12 2FR
Copyright 2021 Hunter Douglas UK Ltd // Any reproduc�on of this drawing in part or as a whole without the wri�en permission of Hunter Douglas UK Ltd (Sunflex) is prohibited // An
General tolerances
SWISH
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
0.1 to 5.9mm
+/- 0.1mm
Material / Finish
6 to 39.9mm
+/- 0.25mm
40 to 120mm
+/- 0.5mm
N/A / N/A
>120mm
+/- 1mm
Angular
+/- 5°
21
2 x End Brackets
Velcro Pads
SWISH
RESERVED FOR PART CODE
HOLD DOWN BRACKET VISUAL
+/- 0.1mm
Material / Finish
+/- 0.25mm
+/- 0.5mm
N/A / N/A
+/- 1mm
+/- 5°
Drawn by RB 07/03/2019 //
RESERVED FOR PART CODE
Project ref - Revision
031231 - A
Status / Comment
CONCEPT
Original Issue
Drawn by RB 07/03/2019 //
.
A3 SHEET 1 OF 1
SWISH
HOLD DOWN BRACKET VISUAL
Material / Finish
N/A / N/A
SWISH
General tolerances
HOLD DOWN BRACKET VISUAL
Unless otherwise specified
0.1 to 5.9mm
+/- 0.1mm
Material / Finish
6 to 39.9mm
+/- 0.25mm
40 to 120mm
+/- 0.5mm
N/A / N/A
>120mm
+/- 1mm
Angular
+/- 5°
RESERVED FOR PART CODE
Project ref - Revision
031231 - A
Status / Comment
CONCEPT
Original Issue
Drawn by RB 07/03/2019 //
.
A3 SHEET 1 OF 1
7825L--01
Project ref - Revision
031231 - A
Status / Comment
CONCEPT
Original Issue
.
A3 SHEET 1 OF 1
RESERVED FOR PART CODE
Drawn by RB 07/03/2019 //
Advertisement
Related Manuals for Dunelm 1000212679
Summary of Contents for Dunelm 1000212679
- Page 1 SWISH BASSWOOD VENETIAN BLIND Fitting Instructions Please keep for future reference Tools required Optional DO NOT SCALE - Dimensions for reference only, always refer to 3D CAD - IF IN DOUBT ASK! The parts may vary from those shown below, should anything be missing or you would like to talk to our IF IN DOUBT ASK! Customer Care Department, please call 0330 005 2233 where our team of experts will be ready to help.
- Page 2 2, 3 WARNING Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product. To avoid strangulation and entanglement, keep cords out of the reach 2, 3 of young children. Cords may become wrapped around a child’s neck. Move beds, cots and furniture away from window covering cords.
- Page 3 Installing the blind Gently place the blind’s headrail into the brackets you have already fitted. Once the blind is situated in the brackets, close the doors ensuring you hear the click meaning the blind is secured in place. If you are using the intermediate brackets, rest the headrail on these securing in place with the end brackets.
- Page 4 Reducing the blind width wall to which you are mounting your blind oor. Reducing the blind width wall to which you are mounting your blind s merchant or DIY store. 1. With the blind fully raised tightly bind both sides of the blind s merchant or DIY store.
Need help?
Do you have a question about the 1000212679 and is the answer not in the manual?
Questions and answers